PDA

View Full Version : Take off from Escort carriers F6F F4U



Werhwolf
01-10-2005, 05:51 AM
Since take off from the escort carriers with any kind of ordnance after the 3.03 patch, with the Hellcat and Corsair is almost impossible due to the fact that no wind is present, I Have found following solution to make it possible to takeoff:

The escort carriers has a max speed of 35 km/h equals appr. 19 kt.
A wind of 15 to 20 knots is common out at sea, wich means a wind over deck of 19+15= 34 knots.
What I do is simply increase the escort carriers speed (and the other ships in the group) to appr. 34 knots by going in to the .mis file of that mission and change the values as shown here:


[Chiefs]
2_Chief Ships.IJNZuikakuCV 2 0 2
3_Chief Ships.IJNShokakuCV 2 0 2
4_Chief Ships.IJNCVGeneric 2 0 2
9_Chief Ships.IJNAmatsukazeDD41 2 0 2
0_Chief Ships.USSSaratogaCV3 1 0 2
1_Chief Ships.USSCVGeneric 1 0 2
10_Chief Ships.IJNBBGeneric 2 0 2
11_Chief Ships.IJNYukikazeDD41 2 0 2
12_Chief Ships.IJNYukikazeDD41 2 0 2
8_Chief Ships.USSWardDD139 1 0 2
13_Chief Ships.USSDentDD116 1 0 2
15_Chief Ships.USSOBannonDD450 1 0 2
[2_Chief_Road]
-535810.69 -496415.66 120.00 0 78 9.166666666666666 -------******** Change 9.166.. to between 15.00 and 20.00 ********-----
-535591.88 -496753.19 120.00
-535373.13 -497090.75 120.00

This can be done for all waypoints.

You have to it in the file couse in the mission builder the ships are limited to the real life max speed.

Werhwolf
01-10-2005, 05:51 AM
Since take off from the escort carriers with any kind of ordnance after the 3.03 patch, with the Hellcat and Corsair is almost impossible due to the fact that no wind is present, I Have found following solution to make it possible to takeoff:

The escort carriers has a max speed of 35 km/h equals appr. 19 kt.
A wind of 15 to 20 knots is common out at sea, wich means a wind over deck of 19+15= 34 knots.
What I do is simply increase the escort carriers speed (and the other ships in the group) to appr. 34 knots by going in to the .mis file of that mission and change the values as shown here:


[Chiefs]
2_Chief Ships.IJNZuikakuCV 2 0 2
3_Chief Ships.IJNShokakuCV 2 0 2
4_Chief Ships.IJNCVGeneric 2 0 2
9_Chief Ships.IJNAmatsukazeDD41 2 0 2
0_Chief Ships.USSSaratogaCV3 1 0 2
1_Chief Ships.USSCVGeneric 1 0 2
10_Chief Ships.IJNBBGeneric 2 0 2
11_Chief Ships.IJNYukikazeDD41 2 0 2
12_Chief Ships.IJNYukikazeDD41 2 0 2
8_Chief Ships.USSWardDD139 1 0 2
13_Chief Ships.USSDentDD116 1 0 2
15_Chief Ships.USSOBannonDD450 1 0 2
[2_Chief_Road]
-535810.69 -496415.66 120.00 0 78 9.166666666666666 -------******** Change 9.166.. to between 15.00 and 20.00 ********-----
-535591.88 -496753.19 120.00
-535373.13 -497090.75 120.00

This can be done for all waypoints.

You have to it in the file couse in the mission builder the ships are limited to the real life max speed.

Heavy_Weather
01-10-2005, 07:24 AM
good tip http://forums.ubi.com/images/smilies/16x16_smiley-wink.gif

Blackdog5555
01-11-2005, 03:27 AM
very resourceful! thanks