PDA

View Full Version : Tuplolev TB 3...



martin255
11-28-2005, 07:40 AM
In game theres 3 versions.Thers one thats flyable and 2 fighers can be attached to its wings.I swore I saw a pick like that but how do you put it that way?I have FB+AEP.Please help me.Thank you

martin255
11-28-2005, 07:40 AM
In game theres 3 versions.Thers one thats flyable and 2 fighers can be attached to its wings.I swore I saw a pick like that but how do you put it that way?I have FB+AEP.Please help me.Thank you

Beuf_Ninja
11-28-2005, 07:58 AM
Read the readme for AEP2.0, there is a special note for mission builders about setting up the TB3sveno. I don't think AI can take off they have to start the mission airborne.
There is a single mission aswell you can try out from the TB3 or I16 perspective

martin255
11-28-2005, 08:03 AM
I know that but how do I fly the TB with the fighters attached cuz the millin or whatever its called uses the same principal and I can fly it..

Beuf_Ninja
11-28-2005, 08:11 AM
What is it that you are trying to do? If you're just looking for a mission for the TB3+I16 their is the single mission, there isn't a dynamic campaign for it though http://forums.ubi.com/groupee_common/emoticons/icon_frown.gif I don't know if there is a user-made campaign maybe somone else would know.
If you are trying to create your own mission then I would start by loading the single mission into the editor and examining how the properties for it are setup

martin255
11-28-2005, 08:36 AM
How do I attach it im mid flight if its under my windg un atatched how do i attch it?

mortoma
11-28-2005, 09:02 AM
Here's part of the readme file from AEP that pertains to the SBP:


Using the SPB

The SPB consists of the TB-3 mothership and a pair of attached I-16s. There are special versions of these, TB-3 4M-34R SPB and I-16type24 SPB.
When building a mission, you can attach the I-16 to the mothership the same way you attach gliders to planes - set up a flight of I-16s with one waypoint, and set the waypoint€s target to the TB-3 (go to the Waypoint tab of the Object window with your I-16 selected, hit the Set button and click on the TB-3). The I-16 will be attached to the TB-3 in the beginning of the mission. You cannot build missions where I-16s start detached from the TB-3 and attach afterwards.
AI flying these I-16s will automatically detach when the TB-3 approaches a GATTACK waypoint. The I-16s then will attack the site and return to escort the TB-3 back. You may use the €œAircraft Attach/Detach€ button when flying these planes to detach from the TB-3, or drop the I-16s if you€re flying the TB-3.
In dogfight mode, you may attach your I-16 to the TB-3 mothership while on the airfield. To do so, taxi the plane to the attachment port under the TB-3€s wing, and press the €œAircraft Attach/Detach€ button. Your plane will be attached to the mothership and your landing gear will be raised automatically.
Note that while attached to a TB-3, I-16s drain the mothership€s fuel reserve, and if their engines are left at low RPM their fuel tanks will slowly refill to 100%.

According to historical sources there were many different versions of the SPB link-up. We only model one of them which was used in 1942 and later.