PDA

View Full Version : Level Bombing



Brutal67
08-05-2005, 09:47 AM

FI-Aflak
08-05-2005, 09:54 AM
I can do very well in the TB-3, but its hard to manage bombsite controls while flying the plane from the front cabin . . . . The level autopilot isn't very reliable so I find myself left-handing the stick while pecking out buttons on the keyboard and then I have to readjust everything . . .

When I manage to get the site and plane set up right I can drop those giant bombs down a chimny.

p1ngu666
08-05-2005, 10:32 AM
when i tried to level bomb last time the rudder trim didnt seem todo anything http://forums.ubi.com/groupee_common/emoticons/icon_confused.gif

i use level stabilzer, and use the rudder trim to line up on target

Ku101-Chainsaw
08-05-2005, 10:56 AM
in a Heinkel I hit the chimney, in a betty I hit the house, in the B25 the garden and in the TB3 I hit... Earht?? lol

well, Im best in Heinkel... but cathing in on the Betty thoe.

Dash_C.
08-05-2005, 11:05 AM
What altitudes do you guys bomb from in the TB-3, He-111, B-25 etc?

Brutal67
08-05-2005, 11:40 AM
Originally posted by Dash_C.:
What altitudes do you guys bomb from in the TB-3, He-111, B-25 etc?

TB3 as low as I can http://forums.ubi.com/images/smilies/88.gif

He-111, B-25 upto and including 20000ft http://forums.ubi.com/images/smilies/16x16_smiley-wink.gif

VFA-25_Peckens
08-05-2005, 02:27 PM
have u guys ever tried using trim instead of the level stabilizer it works much better http://forums.ubi.com/groupee_common/emoticons/icon_wink.gif

F16_Neo
08-05-2005, 03:12 PM
I usually do my levbombing in the Heinkel.
Always use the level stabiliser, then I adjust course with rudder trim (on slider http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif ).
I put the exact altitude into bombsight, and the approximate TAS, then I adjust TAS settings until crosshair follow the ground nicely, switching bombsight-auto on-off to track target.
One thing I noted: On winter maps the TAS settings should be considerably lower than chart say.
Oh and I usually bomb from 3K, 300 km/h IAS.
Top vote here http://forums.ubi.com/groupee_common/emoticons/icon_biggrin.gif.

Brutal67
08-07-2005, 12:58 PM
LoL 120 some views and only 16 answer the question http://forums.ubi.com/images/smilies/35.gif http://forums.ubi.com/images/smilies/cry.gif http://forums.ubi.com/images/smilies/88.gif http://forums.ubi.com/images/smilies/blink.gif http://forums.ubi.com/images/smilies/16x16_smiley-indifferent.gif

Platypus_1.JaVA
08-07-2005, 01:44 PM
I can always hit my target. The key to bombing precise in aircraft like the B-25, He-111 and the Betty are:

1: map rudder trim on a slider.
2: Level stabilizer engaged in bomb run, use rudder trim to line up the target in the azimuth (works beautifull!!!)
3: Put in altitude and adjust TAS so, that the target remains stationary Faster TAS makes your sight run short and slower TAS makes your site drift past the target.

My typical bombrun (altitudes up to 13.000feet or 4000m) starts with engaging the level stabilizer approx 5 to 10 min before target. I set the sight to the correct altitude and the approx correct TAS and I turn the sight up to about 75 degrees. When I see the target, I turn the rudder trim slider to line it up correctly. Once lined up and in the sight's cross, I engage the sight automation. I adjust TAS speed to let the cross remain stationary on the target. all that remains is to sit and wait quietly for the bombs to fall. Level autopilot together with rudder trim on a slider works wonderfully!

Happy bombing!

RasMichael
08-07-2005, 01:52 PM
Platypus said it all.

4x1000kg with 10sec fuse on a TB-3, screaming in on the target at 10 meters is the ultimate rush though...