PDA

View Full Version : Got my LT Extr Digi 3D stick plugged in again.. anyone got a profile?



Yskonyn23
01-13-2005, 08:19 AM
Hi guys,

After battling with my CH Yoke LE I've decided that except from flying bombers, this yoke isn't going to get me alive very long while flying fighters.
So I went to the attic, dusted off my old trusted Logitech stick and plugged it in.
Where my yoke was quite slow and forgiving on the controls, the joystick is way too sensitive (mainly erratic roll behaviour)! Does anyone have a good profile to wack into the hardware settings of IL2/PF for me?

Many thanks!

Yskonyn23
01-13-2005, 08:19 AM
Hi guys,

After battling with my CH Yoke LE I've decided that except from flying bombers, this yoke isn't going to get me alive very long while flying fighters.
So I went to the attic, dusted off my old trusted Logitech stick and plugged it in.
Where my yoke was quite slow and forgiving on the controls, the joystick is way too sensitive (mainly erratic roll behaviour)! Does anyone have a good profile to wack into the hardware settings of IL2/PF for me?

Many thanks!

Yskonyn23
01-15-2005, 08:54 AM
anyone?
If I pull the stick fully aft, the plane is stalling immediately!
In theory, in a given speed range every plane can stall while pulling agressively on the stick, but the behaviour in the sim is way too exaggerated.

jakeand
01-16-2005, 05:37 AM
This work for me..

[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 0 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 10 20 30 40 50 60 70 80 90 100 50
1Y=0 0 4 5 7 10 18 30 47 70 91 50
1RZ=0 0 3 5 7 10 18 30 50 70 98 50
1U=0 100 100 100 100 100 100 100 100 100 100 0
1V=0 100 100 100 100 100 100 100 100 100 100 0
1X1=0 100 100 100 100 100 100 100 100 100 100 0
1Y1=0 100 100 100 100 100 100 100 100 100 100 0
1Z1=0 100 100 100 100 100 100 100 100 100 100 0
1RX1=0 100 100 100 100 100 100 100 100 100 100 0
1RY1=0 100 100 100 100 100 100 100 100 100 100 0
1RZ1=0 100 100 100 100 100 100 100 100 100 100 0

Bear in mind this stick has been with me since CFS1 and not known as a wonder of precision.

regards

Jake

Yskonyn23
01-16-2005, 01:03 PM
Thanks, though what are all those ID's?
Could you edit your post and define what ID's are what controllers and what Axis (e.g. Extreme Digital stick, pitch).

Thanks!

jakeand
01-17-2005, 12:21 PM
Ok, here it comes..

Ailerons/Roll X=0 10 20 30 40 50 60 70 80 90 100
Elevator/Pitch Y=0 0 4 5 7 10 18 30 47 70 91
Rudder/Yaw Z=0 0 3 5 7 10 18 30 50 70 98

I hope this clear things up http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif

Recomended source: http://www.airwarfare.com/tech/sticks.htm

regards

Jake

Yskonyn23
01-17-2005, 03:25 PM
Thanks very much man, now it's so much better http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif