PDA

View Full Version : Could I get sensitivity settings for a CH Combatstick and CH Pedals?



Ba5tard5word
01-06-2010, 03:27 PM
I just got these in the mail and will plug them in tonight and see how they are.

Does anyone have some sensitivity settings they would advise for this stick and pedals? It would save me a lot of testing and starting up the game over and over again. I have the Il2JoyControl program so I can just put in the numbers there or set it to curve or linear if anyone has a start and finish number to recommend. Thanks!

Ba5tard5word
01-06-2010, 03:27 PM
I just got these in the mail and will plug them in tonight and see how they are.

Does anyone have some sensitivity settings they would advise for this stick and pedals? It would save me a lot of testing and starting up the game over and over again. I have the Il2JoyControl program so I can just put in the numbers there or set it to curve or linear if anyone has a start and finish number to recommend. Thanks!

VMF-214_HaVoK
01-06-2010, 03:38 PM
[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X2=0 25 33 42 50 58 67 75 83 92 100 0
1Y2=0 20 29 38 47 56 64 73 82 91 100 0
1Y1=0 1 12 23 34 45 56 67 78 89 100 0
1Z1=0 10 14 18 24 33 42 54 68 83 100 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0
1X=0 10 20 30 40 50 60 70 80 90 100 0
1Y=0 10 20 30 40 50 60 70 80 90 100 0
1X1=0 100 100 100 100 100 100 100 100 100 100 0
1Z2=0 100 100 100 100 100 100 100 100 100 100 0

megalopsuche
01-06-2010, 04:36 PM
I have both and use no scaling whatsoever. However, because my stick is very old and worn, I use a little Y deadband to keep the aircraft from drifting in the pitch axis.

Ba5tard5word
01-06-2010, 07:27 PM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VMF-214_HaVoK:
[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X2=0 25 33 42 50 58 67 75 83 92 100 0
1Y2=0 20 29 38 47 56 64 73 82 91 100 0
1Y1=0 1 12 23 34 45 56 67 78 89 100 0
1Z1=0 10 14 18 24 33 42 54 68 83 100 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0
1X=0 10 20 30 40 50 60 70 80 90 100 0
1Y=0 10 20 30 40 50 60 70 80 90 100 0
1X1=0 100 100 100 100 100 100 100 100 100 100 0
1Z2=0 100 100 100 100 100 100 100 100 100 100 0 </div></BLOCKQUOTE>


Any idea which of these is for the stick? 1X and 1Y? I put this in my conf file but it's only applying the 1X and 1Y ones to the stick.

Ba5tard5word
01-06-2010, 10:37 PM
I tried this one and it feels too hard to make minute movements:

1 4 9 16 25 36 49 64 81 100

Tried all 100's and it's easier to do minute movements but the plane floats all over the place.
Tried linear 50 to 100 and it wasn't much better.

horseback
01-06-2010, 11:07 PM
Do you have Il-2 Joy Control?

That will let you skip past the whole config runaround, and play around with your sensitivity settings with relative ease and comfort..

Also, some folks swear by using the CH Control Manager software to set their sensitivities (not to mention combining the joystick and pedals into One Big Controller).

Either way, if you're used to something else, it may take you a while to get used to the new rig.

Patience, young padawan.

cheers

horseback

Ba5tard5word
01-07-2010, 12:05 AM
But I wanna blow up a B-29 noooow!!! http://forums.ubi.com/images/smilies/compsmash.gif



Nah just kidding, I am trying to be patient and will hopefully get used to it. I tried going back to my old Logitech stick and wow it feels really stiff in comparison to the CH stick.

I'll see how I like the CH stuff, I can barely use the pedals now. Seems like my deflection shots are way better with this stick, but most of the time I'm flailing around because I'm not used to its level of control. I'm not crazy about how it feels like the stick is on an XY rail because of the stiff axes but hopefully either I get used to it or it loosens up a bit.

TgD Thunderbolt56
01-07-2010, 08:24 AM
I've used the default stick settings since day one and love them.

I fiddled with some stick curves a few years ago, but never really found any I liked enough to replace the default ones.

Fogmaster_
01-07-2010, 08:39 AM
ok, so depending on how the sticks are recognized in your profile. Open CH manager and check the tab ordering,

The leftmost is x, the next is x1, the next is x2 and so on.

I use 10 20 30 40 50 60 70 80 100 0 I believe for my CH setup and it works fine. I would really suggest staying away from all 100's as some people suggest.

I find I am able to be WAY more accurate with the less sensitive settings when shooting. If you have all 100's your gonna be all over the place.

Ba5tard5word
01-07-2010, 08:39 PM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">ok, so depending on how the sticks are recognized in your profile. Open CH manager and check the tab ordering,

The leftmost is x, the next is x1, the next is x2 and so on. </div></BLOCKQUOTE>

Ok I've got it like this now, but when I start up Il-2, it still thinks that the pedals are the main stick and the stick is "ID2." I don't see a way in windows to order the devices in a row. The stick and pedals still work properly in game but I want to make sure the stick settings I'm using are applied to the stick and not the pedals and vice versa, and I have no way of knowing because when to move around the thing for elevators on the input menu I have to move the pedals, not the stick. Argh.

Ba5tard5word
01-07-2010, 09:44 PM
Ok I think I've gotten it all figured out, sure took a while and lots of hair pulling. The CH software is not very intuitive at all and Il-2 being goofy doesn't help. Oh well I just got a nice kill on a Tomahawk. http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif