PDA

View Full Version : X45 Rotary Switch for prop pitch



XyZspineZyX
07-02-2003, 12:38 PM
How can I use the rotary switch on my X45 to adjust prop pitch?
And where should I extract the Il2 Stab to install in the game?

XyZspineZyX
07-02-2003, 12:38 PM
How can I use the rotary switch on my X45 to adjust prop pitch?
And where should I extract the Il2 Stab to install in the game?

Tully__
07-02-2003, 01:00 PM
At the very bottom of the in game controls assignment page, in the section under the heading HOTAS, click in the right column next to Propellor Pitch. Move the rotary. Prop pitch is now assigned to the rotary. Test fly it, if it works the wrong way for you, repeat the process but move the rotary the other way.

<center> ================================================== ========================= </center>

<center> <img src=http://members.optusnet.com.au/tully_78th/Corsair.jpg> </center>

<center> The "under performing planes" thread (http://www.simhq.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=35;t=007540) /i/smilies/16x16_smiley-wink.gif </center>
<center> Forum Terms of Use (http://www.ubi.com/US/Info/TermsOfUse.htm) </center>


Salut
Tully