PDA

View Full Version : TripleHead2Go Help



Ronbo1931
06-28-2007, 05:06 PM
Recently I lost my old system and installed a new vista computer. The TripleHead2Go program is up an running. My FSX flight simulator works fine. However, the IL-2 1946 works but there is a problem with my view. Under the old computer I was able to see wing tip to wing tip. On the new system I only see about 60% in the wide view. If I remember correctly there is a statement modification required to get the expanded view. Can anyone give me the details.

Ronbo1931
06-28-2007, 05:06 PM
Recently I lost my old system and installed a new vista computer. The TripleHead2Go program is up an running. My FSX flight simulator works fine. However, the IL-2 1946 works but there is a problem with my view. Under the old computer I was able to see wing tip to wing tip. On the new system I only see about 60% in the wide view. If I remember correctly there is a statement modification required to get the expanded view. Can anyone give me the details.

dbillo
06-28-2007, 06:44 PM
I think you have to do two things under the [window] section of your conf.ini file:

1) Set a custom resolution which is equal to three side by side 4:3 aspect ratio displays.

2) Set Use3Renders=1

Ronbo1931
06-28-2007, 10:51 PM
My width is set to 3072, height to 768. The Use3Renders=1 There must be some other Statement but what it is I sure don't know.