PDA

View Full Version : Oleg's Input Settings



XyZspineZyX
06-18-2003, 07:50 PM
Hello... I found these settings in another thread, and they're supposedly Oleg's settings for the Afterburner (which I use).

Are these for FB only? I would like to use for the original IL-2. Does this have a similar block in the conf.ini? Should I just enter these figures into the Pitch, Roll & Yaw manually in the game? If so, what do I do with the rest of those numbers?

- Blind

[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 10 20 30 40 50 60 70 80 90 100 0
1Y=0 5 9 15 23 31 42 54 67 79 91 0
1RZ=0 0 4 11 17 28 38 49 61 78 98 0
1U=0 100 100 100 100 100 100 100 100 100 100 0
1V=0 100 100 100 100 100 100 100 100 100 100 0

XyZspineZyX
06-18-2003, 07:50 PM
Hello... I found these settings in another thread, and they're supposedly Oleg's settings for the Afterburner (which I use).

Are these for FB only? I would like to use for the original IL-2. Does this have a similar block in the conf.ini? Should I just enter these figures into the Pitch, Roll & Yaw manually in the game? If so, what do I do with the rest of those numbers?

- Blind

[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 10 20 30 40 50 60 70 80 90 100 0
1Y=0 5 9 15 23 31 42 54 67 79 91 0
1RZ=0 0 4 11 17 28 38 49 61 78 98 0
1U=0 100 100 100 100 100 100 100 100 100 100 0
1V=0 100 100 100 100 100 100 100 100 100 100 0

XyZspineZyX
06-18-2003, 07:51 PM
It is the same for IL-2 and FB.

You can copy/paste into the conf.ini.

XyZspineZyX
06-18-2003, 07:52 PM
Beautiful.... thanks, Fennec!!

- Blind


StG77_Fennec wrote:
- It is the same for IL-2 and FB.
-
- You can copy/paste into the conf.ini.
-
-

XyZspineZyX
06-18-2003, 07:54 PM
And just out of curiosity... is there a listing somewhere that would tell me what each of those lines controls? In case I get the urge to tweak a bit?

X = Pitch
Y = Roll
Z = Yaw

But what's the rest?


Blind-SC- wrote:
- [rts_joystick]
- X=0 1 4 9 16 25 36 49 64 81 100 0
- Y=0 1 4 9 16 25 36 49 64 81 100 0
- Z=0 10 20 30 40 50 60 70 80 90 100
- RZ=0 10 20 30 40 50 60 70 80 90 100 0
- FF=0
- U=0 10 20 30 40 50 60 70 80 90 100 0
- V=0 10 20 30 40 50 60 70 80 90 100 0
- 1X=0 10 20 30 40 50 60 70 80 90 100 0
- 1Y=0 5 9 15 23 31 42 54 67 79 91 0
- 1RZ=0 0 4 11 17 28 38 49 61 78 98 0
- 1U=0 100 100 100 100 100 100 100 100 100 100 0
- 1V=0 100 100 100 100 100 100 100 100 100 100 0

XyZspineZyX
06-18-2003, 08:39 PM
It depends on how FB is reading your controllers.

My stick is on ID2:
1X1=ailerons
1Y1=Elevator

my rudder pedals are ID1:
1X=rudder

1X1=10 10 20 30 40 50 60 70 80 90 100 2

The first number is my deadzone(10)

Then you have the 10 numbers for the amount of travel

Finally the last number is the amount of filtering(2)