PDA

View Full Version : fw 190 convergence for the a-9 and Dora



jessi1
04-28-2005, 05:39 AM
Hey guys what is your favorite convergence settings for the 190's. I like 300 for the mgs and 225 for the cannons seems to work good, just curious as to what you all use. For the dora mg 150 and cannons 225. Have a good day, maybe the patch today because its my birthday 35 years young, I wont hold my breath though.

dieg777
04-28-2005, 05:43 AM
happy birthday http://forums.ubi.com/groupee_common/emoticons/icon_biggrin.gif

Following advice in a previous post I would try either 500 or 1000 this seems to give a flatter truer flight thro the gunsite. If I set it lower I tend to shoot low

good luck

Monson74
04-28-2005, 05:55 AM
I use 200 always on any plane. I prefer having the rounds ending up as close to each other as possible for maximum damage & I don't do headons or long shots much. In my experience this will provide the best chance of fatal structural damage like shooting wings off for example. It can even be done against a Jug if you aim carefully.

tigertalon
04-28-2005, 06:02 AM
D9: 500m minimum for all weapons
A9: 500m for inner weapons, 150m for outer ones (I use those only when real close)

Oh, yes, happy birthday! http://forums.ubi.com/images/smilies/25.gif

LeadSpitter_
04-28-2005, 06:26 AM
I use 225 for mg, for cannon I use 255.34. It seems to work well and explode any allied fighter in a short burst with 20mm.

With 108 wingcannon ill go to 300-350 which is extremely devastating and easy to aim long ranges.

RedNeckerson
04-28-2005, 07:53 AM
I'm now using 1000 meters for cannons.

mynameisroland
04-28-2005, 08:52 AM
I use 400m for all guns on all Fw models. I find it works for me. It doesnt mean I always shoot at 400 but it does mean the rounds fly straighter and you dont need to pull so much lead. This is an important factor in a Fw 190 if you pull too much E you bleed speed and stall so convergence can help you there. If I were to change it would be to 500m not below 400m.

T_O_A_D
04-28-2005, 09:05 AM
Happy B day http://img.photobucket.com/albums/v37/T_O_A_D/Smilies/Birthdaycake.gif

My dads is tommorrow and mine is Saturday. 63 for him 40 for me.

I use 500 for inner and 200 for outer

faustnik
04-28-2005, 09:55 AM
Fw190A9:

Air to air - MG(and inner Mg151)200m / outer guns 225m

Air to Ground - 500m for both

LLv34_Stafroty
04-28-2005, 10:21 AM
100m for every gun, except rare cases when makin ground bounding, then some 300m is gut ja.
hit accuracy goes sky high with that settin, cos it forces to open fire at close ranges http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif
others can spray n pray if they want.

BuzzU
04-28-2005, 10:41 AM
I've tried every convergence you can think of, and shot from every distance you can think of too. I finally decided to set all guns to fire on the trigger, and set convergence to 125m. I won't shoot until i'm at that distance. You don't need to figure in any lead, and with all guns firing. One quick burst is all you need. It saves a lot of ammo too.

If you're the type who's impatient. This won't work. You'll pass up many more shots that you'll take, but when you do take one, you'll get a kill.

I believe this is how Hartmann fought.

gates123
04-28-2005, 01:06 PM
150m = MG's
125m = Cannons

Open fire just under 150m, anything farther he'll get spooked and your off to the races

73GIAP_Milan
04-28-2005, 01:13 PM
500M for MG's and Cannons works perfectly, you can make longer distance shots with it and still shred up close...
this is in regard to my Fw190A5..
http://forums.ubi.com/groupee_common/emoticons/icon_cool.gif

Happy hunting http://forums.ubi.com/images/smilies/25.gif

Hunde_3.JG51
04-28-2005, 07:04 PM
500m for all 190's.