PDA

View Full Version : TS key binding (asked to post this by a friend)



JG6_Oddball
03-06-2005, 11:30 AM
There is a function in teamspeak that will allow you to asign "hotkeys" what this means is that you can change room in TS buy just hiting an asigned key.
example: you get on TS for a COOP and wind up flying red, you just hit the asigned key and it moves you to the red room. below is a pic of howto set this function up.

ATTENTION TS SERVER ADMINS!! plz use this general name format :lobby: IL2 :red: blue: for IL2 so that everyones hot key asignment is universaly aplicable .
example: some one joins the server (lobby) there should be a room called "IL2" and under IL2 there should be "red","blue"
http://jg6.net/images/TSkeybind.png

S!

Extreme_One
03-06-2005, 12:15 PM
Didn't know that - thanks for the headsup http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif

Bearcat99
03-06-2005, 02:06 PM
I use my numpad keys for TS hotkeys. I believe it can be server specific... different for each server.

antifreeze
03-06-2005, 05:33 PM
> ATTENTION TS SERVER ADMINS!! plz use this
> general name format :lobby: IL2 :red: blue:
> for IL2 so that everyones hot key asignment
> is universaly aplicable.

lol!! Is this a serious request??? Good luck!!

Most people just alt-tab to desktop to get into the correct channel, and there isn't really a big problem with that is there?
But also there is a beautiful little program available from the TS developers page. It sits on-screen whilst PF is running and tells you who is currently speaking/joining/leaving. But it can also tell you which channel you're in, so you can just bind keys for up/down and see when you're in the correct channel without even alt-tabbing.

EDIT: I even went and found the url for you!
http://tsdisp.sourceforge.net/

But anyway... good luck with persuading all the TS hosts to change their channel names.

Capt.LoneRanger
03-06-2005, 05:48 PM
Most TS-Servers have several subchannels for wings, groups, etc. It's a good find, but I always use the alt-tab to join the channel, when I'm on the map, choosing my airfield (to cause no lag/stutter).

I'd also recommend TSDisplay, btw. It's a handy program that shows the names of channel-members talking. Very handy, since it sometimes difficult to differentiate between pilots by recognition of their voices. http://forums.ubi.com/images/smilies/16x16_smiley-wink.gif

RAF92_Mustang
03-06-2005, 05:49 PM
Great information, thanks. Would be nice not to minimize programs to change TS channels.

Tully__
03-07-2005, 12:00 AM
With the "Switch to:Next Channel" and "Switch to:Prev. Channel" commands you can navigate just about any server without having to Alt-Tab at all.

You can also set a default channel in the connect setup for each server, making it even easier.