PDA

View Full Version : Any X-52 "Modders" Out There?



GSNei
04-08-2006, 07:04 PM
I saw some photos recently, I think it was here, of some heavily modified X-52's. My question - I'd realley like to replace the stock spring with one that's heavier. Is it possible to pull the handle off the shaft without dsconnecting any wiring?

GSNei
04-08-2006, 07:04 PM
I saw some photos recently, I think it was here, of some heavily modified X-52's. My question - I'd realley like to replace the stock spring with one that's heavier. Is it possible to pull the handle off the shaft without dsconnecting any wiring?

Wilburnator
04-08-2006, 07:11 PM
Get a big washer and cut a slot in it. Pull the top of the spring down and slide the washer in between the spring and the handle base. Presto... stiff spring. Want it stiffer? Use a thicker washer, or more than one.

Salute

GSNei
04-08-2006, 07:45 PM
Thanx - I actually have one on the bottom of the spring now, maybe I'll try one on on the top as well and see what that does. http://forums.ubi.com/images/smilies/16x16_smiley-happy.gif