PDA

View Full Version : X52 ADJUSTMENT THAT ALL MUST KNOW



marcocomparato
01-11-2005, 09:19 PM
Im hearing about too many people not using their X52 because of its feeling wrong - and i think most just forgot to default their settings and adjust from scratch.

It was mentioned by another forum poster, but after testing -

the X52 requires that you max out your response curve in the IL2 INPUT settings. The original poster recommended using all 100% which is a bit of overkill, but the deadzone is completely gone this way.

all X52 users should basically default all PITCH and YAW to all 100 in the sliders and adjust downward from there to taste.

my settings:
YAW: 64 73 79 80 81 82 82 85 91 100
PITCH: 70 77 82 88 93 95 97 97 98 99
RUDDER: 1 4 18 36 50 61 68 76 82 85 88 60


(or conf.ini speakhttp://forums.ubi.com/groupee_common/emoticons/icon_smile.gif
1X=0 64 73 79 80 81 82 82 85 91 100 100
1Y=0 70 77 82 88 93 95 97 97 98 97 100
1RZ=1 4 18 36 50 61 68 76 82 85 88 60

Hope this helps

marcocomparato
01-11-2005, 09:19 PM
Im hearing about too many people not using their X52 because of its feeling wrong - and i think most just forgot to default their settings and adjust from scratch.

It was mentioned by another forum poster, but after testing -

the X52 requires that you max out your response curve in the IL2 INPUT settings. The original poster recommended using all 100% which is a bit of overkill, but the deadzone is completely gone this way.

all X52 users should basically default all PITCH and YAW to all 100 in the sliders and adjust downward from there to taste.

my settings:
YAW: 64 73 79 80 81 82 82 85 91 100
PITCH: 70 77 82 88 93 95 97 97 98 99
RUDDER: 1 4 18 36 50 61 68 76 82 85 88 60


(or conf.ini speakhttp://forums.ubi.com/groupee_common/emoticons/icon_smile.gif
1X=0 64 73 79 80 81 82 82 85 91 100 100
1Y=0 70 77 82 88 93 95 97 97 98 97 100
1RZ=1 4 18 36 50 61 68 76 82 85 88 60

Hope this helps

MrQBerrt
01-12-2005, 10:39 AM
bump for new or potential x-52 users

I just got my stick 2 days ago, and was about to send it back until I found threads like this one.
I fly at 100% all the way across and things work a lot better now.

GSNei
01-12-2005, 08:16 PM
THANK YOU! I thought I was having so much trouble mainly because I was used to the much stiffer spring of the X-45. I couldn't hold a steady bead. I had to change the config because I have pedals so the sliders don't apply to the stick. So why does setting the X,Y values at 100 all the way across make it perform better than a graduated scale?

cwojackson
01-12-2005, 08:51 PM
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by marcocomparato:
Im hearing about too many people not using their X52 because of its feeling wrong - and i think most just forgot to default their settings and adjust from scratch.

It was mentioned by another forum poster, but after testing -

the X52 requires that you max out your response curve in the IL2 INPUT settings. The original poster recommended using all 100% which is a bit of overkill, but the deadzone is completely gone this way.

all X52 users should basically default all PITCH and YAW to all 100 in the sliders and adjust downward from there to taste.

my settings:
YAW: 64 73 79 80 81 82 82 85 91 100
PITCH: 70 77 82 88 93 95 97 97 98 99
RUDDER: 1 4 18 36 50 61 68 76 82 85 88 60


(or conf.ini speakhttp://forums.ubi.com/groupee_common/emoticons/icon_smile.gif
1X=0 64 73 79 80 81 82 82 85 91 100 100
1Y=0 70 77 82 88 93 95 97 97 98 97 100
1RZ=1 4 18 36 50 61 68 76 82 85 88 60

Hope this helps <HR></BLOCKQUOTE>I love the X52. One of the problems I think a lot of people have with it is you have finese it, not slam it around like an arcade control.

Chivas
01-12-2005, 10:58 PM
I've tried everything to like this stick. I just don't like its long throw or the adjustments you can make to shorten it.
I feel I must take my hacksaw and make a few small adjustments. Unfortunately its a tricky operation with a 50% chance of success.
I haven't made my first cut yet...still looking for the courage. http://forums.ubi.com/groupee_common/emoticons/icon_biggrin.gif

XyZspineZyX
01-13-2005, 05:24 AM
Mmm, dunno.....

Tried 100 all the way and found it much, much too sensitive.
Tried it with my previous settings 80 -96 in even steps(FFB2) and still found it way too sensitive.

Am using these settings ATM and find them very, very good...

1X=0 36 40 44 48 52 56 60 64 69 74 0
1Y=0 36 40 44 48 53 58 64 69 74 79 0
1RZ=0 79 81 83 85 87 89 91 93 94 95 0

X52 is one screamer of a stick, though still needs a few postion adjustments and a larger palmrest, but...................yeehar

marcocomparato
01-14-2005, 12:49 AM
ya Vagueout i agree. a decent amount of curve is still desirable.

this X52 is awesome. so many axis to work with.