PDA

View Full Version : Explain the Codes!



VFS-214_Hawk
10-28-2005, 07:05 PM
Explain the codes, for example X=Roll, Y=Picth, FF=?, 1Z2=?


[rts_joystick]
X= Roll
Y= Pitch
Z= Yaw
RZ= Rotate
FF= Force Feedback
U=
V=
1X=
1Y=
1RZ=
1U=
1V=
1X1=
1Y1=
1Z1=
1X2=
1Y2=
1Z2=
1U1=
1V1=
1X3=
1Y3=
1Z3=

I have

MSFF2
CH Throttle
CH Peds

YAKMAN1968
10-28-2005, 07:10 PM
FF = Force Feedback.

No idea on the rest

-HH- Beebop
10-28-2005, 08:09 PM
From airwarfares' Joystick Guide:

<span class="ev_code_yellow">The line FF=0 is the Force Feedback toggle. If you're using a force feedback joystick and have forces switched on it will be set FF=1.

The lines we're interested in start with the line beginning "1X=.....". The lines beginning 1X, 1Y, 1RX, 1RZ, 1U, 1V & 1Z correspond to the Windows ID#1 controller (there may be more or less in your file, depending on the number of axes present on your controllers). The lines corresponding to the ID#2 controller begin 1X1, 1Y1, 1RX1, 1RZ1 etc. If you have more controllers plugged in you will also have 1X2, 1Y2, 1RX2, 1RZ2 etc for Windows ID#3 and so forth. Though the author has never tested, it is believed that the IL2 series supports up to four controllers.</span>

In my Controls setup U= Throttle (-U slider Axis) and V=Prop Pitch (V Slider Axis). Elevator is mapped to -X Axis rotation
The elevator and prop pitch are mapped to the rotaries on the X-45 Throttle.

Hope that helps.

VFS-214_Hawk
10-28-2005, 08:24 PM
I found this...I am getting there


Controller Controls Screen conf.ini
ID#1 X-Axis 1X
ID#1 Y-Axis 1Y
ID#1 X-Axis Rotation 1RX
ID#1 Z-Axis Rotation 1RZ
ID#1 U-Slider 1U
ID#1 V-Slider 1V
ID#2 X-Axis ID2 1X1
ID#2 Y-Axis ID2 1Y1
ID#2 X-Axis Rotation ID2 1RX1
ID#2 Z-Axis Rotation ID2 1RZ1
ID#2 U-Slider ID2 1U1
ID#2 V-Slider ID2 1V1


Now can I delete what I dont use or need?

VFS-214_Hawk
10-28-2005, 09:25 PM
Ok, I have made my best adjustments

X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 10
Z=0 10 20 30 40 50 60 70 80 90 100 30
RZ=0 0 0 0 0 0 0 0 0 0 0 0
FF=1
U=0 100 100 100 100 100 100 100 100 100 100 0
V=0 0 0 0 0 0 0 0 0 0 0 0
1X=0 1 4 9 16 25 36 49 64 81 100 0.....roll
1Y=0 1 4 9 16 25 36 49 64 81 100 10....pitch
1RZ=0 0 0 0 0 0 0 0 0 0 0 0
1U=0 100 100 100 100 100 100 100 100 100 100 0...prop pitch
1V=0 0 0 0 0 0 0 0 0 0 0 0
1X1=0 0 0 0 0 0 0 0 0 0 0 0
1Y1=0 0 0 0 0 0 0 0 0 0 0 0
1Z1=0 100 100 100 100 100 100 100 100 100 100 0...throttle
1X2=0 0 0 0 0 0 0 0 0 0 0 0
1Y2=0 0 0 0 0 0 0 0 0 0 0 0
1Z2=0 10 20 30 40 50 60 70 80 90 100 30
1U1=0 0 0 0 0 0 0 0 0 0 0 0
1V1=0 0 0 0 0 0 0 0 0 0 0 0
1X3=0 0 0 0 0 0 0 0 0 0 0 0
1Y3=0 0 0 0 0 0 0 0 0 0 0 0
1Z3=0 10 20 30 40 50 60 70 80 90 100 30...rudder peds

MSFF2
CH Throttle
CH Peds

hobnail
10-29-2005, 01:19 AM
Get the excellent IL2 Stick (http://www.airwarfare.com/Sims/FB/fb_essential_files.htm#087)utility. It deciphers which curves are which and doesn't list the axis that aren't bound to a controller.

FoolTrottel
10-29-2005, 03:09 AM
IL2-Sticks does show it all, see the line below the 'Remark' text field...
http://img.photobucket.com/albums/v668/fooltrottel/IL2-Sticks-01.jpg

Have Fun!

LEXX_Luthor
10-29-2005, 04:50 AM
I manually went through my "conf" file setting to Zeros each line until I found the axes I needed, and Deleted the rest. You may Delete what you don't use. This is mine, just trimmed it down after seeing this thread.

Always keep a backup of your last heavily modded "conf" file, just in case.

[rts_joystick]
1X=0 0 0 0 0 0 0 0 0 0 0 0
1Y=0 1 2 3 5 8 13 22 36 50 60 0
1Z= 0 00 00 00 00 00 00 00 00 00 000 0
1X1=0 1 4 9 16 25 36 49 64 81 100 0
1Y1=0 1 4 9 16 25 36 49 64 81 100 0
1Z1=0 1 4 9 16 25 36 49 64 81 100 0

All I have is very primitive (but physically massive) joystick with equally massive throttle and I have tiny racing wheel pedals, so I don't have much.

VFS-214_Hawk
10-29-2005, 05:08 PM
He is my final setting

FF=1
1X=0 1 4 9 16 25 36 49 64 81 100 10
1Y=1 1 4 9 16 25 36 49 64 81 100 20
1U=0 100 100 100 100 100 100 100 100 100 100 0
1Z1=1 100 100 100 100 100 100 100 100 100 100 0
1Z2=0 10 20 30 40 50 60 70 80 90 100 30

1X Roll MSFF2
1Y Pitch MSFF2
1U Prop MSFF2
1Z1 Throttle CH Throttle
1Z2 Rudder CH Rudder Peds

ALL USB

I still get the yaw occilation for up to 2 to 4 seconds.