PDA

View Full Version : Hardware profile settings with version 4.01



BM357_Faust
06-14-2005, 02:21 PM
Oleg,

In an earlier version, sorry I don't recall which, you posted suggested hardware profiles for Roll, Pitch & Yaw. Would you be so kind as to provide your new recommended settings for the new flight model?

Thank you for all your hard work and dedication,

Hunter82
06-14-2005, 08:10 PM
Faust.. I believe stick values on Olegs setup have not changed but I'll see if I can get some info if there has been any changes

BM357_Faust
06-15-2005, 02:04 PM
Thanks Hunter!

new-fherathras
06-15-2005, 02:05 PM
OMG

Bartsimpson-
06-17-2005, 10:51 PM
Originally posted by BM357_Faust:
Oleg,

In an earlier version, sorry I don't recall which, you posted suggested hardware profiles for Roll, Pitch & Yaw. Would you be so kind as to provide your new recommended settings for the new flight model?

Thank you for all your hard work and dedication,


Faust,

Here are oleg's original settings for stick set up , have played around with the yaw input but with little success good luck .

Bartman .

pitch 0,5,10,17,25,33,43,54,71,100.

roll 0,3,7,15,25,35,50,66,84,100.

yaw 0,8,19,29,39,51,62,75,86,100.

Tachyon1000
06-18-2005, 04:46 PM
Those settings I find to be awful and unresponive. I'd find a post with Tully's sig in it and link to his stick setting which while a bit jumpy at first provide good response,

Tully__
06-19-2005, 04:35 AM
Tully's sig on cue http://forums.ubi.com/groupee_common/emoticons/icon_wink.gif