PDA

View Full Version : Hey Gibbage!



Yellonet
07-10-2004, 03:44 AM
You were the one that modeled the P-38s in FB right? Are you doing some earlier versions for PF... if you can comment on that? http://ubbxforums.ubi.com/images/smiley/16x16_smiley-wink.gif


- Yellonet

Yellonet
07-10-2004, 03:44 AM
You were the one that modeled the P-38s in FB right? Are you doing some earlier versions for PF... if you can comment on that? http://ubbxforums.ubi.com/images/smiley/16x16_smiley-wink.gif


- Yellonet

Cess_Wizard
07-10-2004, 08:17 AM
If he is and under contract then a NDA applies.

IV_JG51_Razor
07-10-2004, 09:01 AM
Don't bother him, he's working on a PBY-5A!! http://ubbxforums.ubi.com/images/smiley/16x16_smiley-wink.gif

Razor
IV/JG51 11/12 Staffelkapitan
www.jg51.net (http://www.jg51.net)

"Good judgement comes from experience, and experience comes from poor judgement"

heywooood
07-10-2004, 09:22 AM
nah - he's working on that friggin' pancake most likely! Ufff! that thing is a flying monstrosity...



http://img78.photobucket.com/albums/v250/heywooood/ac_32_1.jpg
"Check your guns"

VW-IceFire
07-10-2004, 09:24 AM
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Yellonet:
You were the one that modeled the P-38s in FB right? Are you doing some earlier versions for PF... if you can comment on that? http://ubbxforums.ubi.com/images/smiley/16x16_smiley-wink.gif


- Yellonet<HR></BLOCKQUOTE>
NDA (non-disclosure agreement) will prevent anyone working on PF making any comments like that unless authorized to.

So you likely won't get an answer...don't take it personally.

http://home.cogeco.ca/~cczerneda/sigs/tmv-sig1.jpg
RCAF 412 Falcon Squadron - "Swift to Avenge"

Yellonet
07-10-2004, 09:37 AM
Heh... he posts in here a lot, so by not answering I know he's under a NDA which means that he is working on early P-38s... I know, my logic is impeccable http://ubbxforums.ubi.com/images/smiley/34.gif


- Yellonet

|CoB|_Spectre
07-10-2004, 04:09 PM
Hmmm...this could be a good thing! I remember when Gibbage, after posting many screenshots depicting .50 cal dispersion, said he would not do anymore 3D work for Oleg if it was not changed. After previously posting there was nothing wrong with the .50 cal dispersion and it would not be changed, Oleg recently posted it would be changed to placate "the whiners" and people "too stupid" to understand his data. Therefore, if Gibbage is under a NDA, that would mean all is forgiven and he is back to modeling for 1C:Maddox. That would be a good thing. Since I guess I'm one of "the stupid" http://ubbxforums.ubi.com/images/smiley/351.gif, I was wondering if Gib might be willing to work out something on the muzzle flash and 190 windscreen bar? Most often it's the squeeky wheel that gets the grease. http://ubbxforums.ubi.com/images/smiley/16x16_smiley-wink.gif

Gibbage1
07-10-2004, 04:48 PM
Since I am not doing the early P-38's, I am under no NDA to not talk about them http://ubbxforums.ubi.com/infopop/emoticons/icon_wink.gif Lol. I have not heard anything about early P-38's and I am not doing them. I dont know if Luthier has someone modifying the J into an early model eather. Who knows. Im guessign you will find out when I do.

BTW. I did offer Luthier, but he said no. Again, I dont know if that means it wont be in, or alread had someone converting them.

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Yellonet:
You were the one that modeled the P-38s in FB right? Are you doing some earlier versions for PF... if you can comment on that? http://ubbxforums.ubi.com/images/smiley/16x16_smiley-wink.gif


- Yellonet<HR></BLOCKQUOTE>

Gibbage1
07-10-2004, 05:08 PM
Well the truth is I am not doing any more stuff for 1C. Im finishing up the PBY and thats it. The stuff I was doing for PF is long finished. Once the PBY is complete, my business is done. Its time for me to move on anyways.

Oleg has asked me to model for BoB. The detail, accuracy and quality he is asking is WAY to much for just 1 man. I politly said no. That was long before the .50 cal came up, and before BoB was even announced http://ubbxforums.ubi.com/infopop/emoticons/icon_wink.gif

Oleg and I are still in comunication. Its just that I must move on. But trust me when I say I will never leave the flight sim comunity.

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by |CoB|_Spectre:
Hmmm...this could be a good thing! I remember when Gibbage, after posting many screenshots depicting .50 cal dispersion, said he would not do anymore 3D work for Oleg if it was not changed. After previously posting there was nothing wrong with the .50 cal dispersion and it would not be changed, Oleg recently posted it would be changed to placate "the whiners" and people "too stupid" to understand his data. Therefore, if Gibbage is under a NDA, that would mean all is forgiven and he is back to modeling for 1C:Maddox. That would be a good thing. Since I guess I'm one of "the stupid" http://ubbxforums.ubi.com/images/smiley/351.gif, I was wondering if Gib might be willing to work out something on the muzzle flash and 190 windscreen bar? Most often it's the squeeky wheel that gets the grease. http://ubbxforums.ubi.com/images/smiley/16x16_smiley-wink.gif<HR></BLOCKQUOTE>

Yellonet
07-10-2004, 05:12 PM
That's good to hear Gib. About not leaving that is http://ubbxforums.ubi.com/infopop/emoticons/icon_smile.gif


- Yellonet

DuxCorvan
07-11-2004, 08:03 AM
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Gibbage1:
BTW. I did offer Luthier, but he said no. Again, I dont know if that means it wont be in, or alread had someone converting them.<HR></BLOCKQUOTE>

I guess his answer was: seven. http://ubbxforums.ubi.com/images/smiley/16x16_smiley-tongue.gif

- Dux Corvan -
http://www.uploadit.org/DuxCorvan/Altamira2.jpg
Ten thousand years of Cantabrian skinning.