stuck at 10 % | Forums

[XyZspineZyX]

im stuck at 10% iv read the only other 10% post and it dosnt make sesne to me...its the part where you move the piller things around with some dude yelling at you any help would be nice . THX))

[XyZspineZyX]

im stuck at 10% iv read the only other 10% post and it dosnt make sesne to me...its the part where you move the piller things around with some dude yelling at you any help would be nice . THX))

[XyZspineZyX]

Okay...you are in the secret passage...and I dont think I can get much plainer than that explanation.


One handle moves the platform down...the other handle spins it around...go into your l1 view....look at the holes..it shows you what bar goes in it. they are moons, I like to call them...on is a full moon, 3/4 moon, 1/2 moon...and 1/4 moon. You have to get the right bar into the slot.

look at the grooves in the wall....you have to be able to move the bars around and up and down the slots to pick up the others.

Now, follow the other post...as to which beam to pick up first.



http://princeofpersia.proboards20.com/

[XyZspineZyX]

Pick from the right foremost, then followed by the 3rd from the right, then shift the one on the foremost left and picked up the 3rd from the right and lastly pick the utmost left and lift it all up

after that, go across and turn left to throw the "INVISIBLE" ladder

[XyZspineZyX]

wuts foremost??? cna sum1 tell me wihc ons go first second and third and 4th

[XyZspineZyX]

The logo on the wall above the axle has to match the logo where the light comes out. Thats the first thing.

Second is you have to get all 4 axles before going up. If you look on the wall. You will see how the grooves are, so you can proceed upward with all axles without getting stuck.