Don't post the video of the guy with the pulley and otf mechanism. I thought of one and think it would work, but don't know. I'm not talking about one working just like in the game. I believe we have all seen code page 3. No gravity mechanisms allowed. How do you think it's made? I'll tell mine after today.
I dont think this is the right forum for this, http://sinza.forumotion.com/ sinza's forums have done every incarnation of the blade you can think of check it out, i don't think you'll get much help here, sinza's forums are really helpful for that kinda stuff.
I wasn't really expecting help, but thanks for the link. I guess I'll explain mine... There are 4 springs total. 1 in front facing back and one in the back facing the front. There is a spring on the bottom facing up in the back and another in the front. The last 2 are for the locking mechanisms. They push out a wedge thing that is pushed down by the blade and then it goes into the blade. When you pull the cord that is run through the locking mechanism springs that connect to the wedges, it releases the hidden blade. The spring in the back pushes it forward into the next spring and locking mechanism. The blade pushes down the locking mechanism wedge and the front spring simultaneously and then, when you are done, you pull the cord again and then the locking mechanism is released, the blade is pushed back, and into the next spring and locking mechanism and the process repeats. The blade is one solid blade, not a 2 part blade. The cord is split in two to reach the 2 locking mechanisms in the front and back. If I was unclear, tell me please.
Last edited by JCearlyyears; 04-06-2012 at 11:04 PM.