Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Help,dose any one no what this is | Forums

  1. #1
    Hi guys,got the game up,and spent a few days tweaking,Ive did have problems flying over land but seems ok now,im just getting these weird images on the ground,im no expert so pardon the pun, Thanks for your time,i would be greatful if anyone new?

    Reply With Quote Reply With Quote

  2. #2
    Hi guys,got the game up,and spent a few days tweaking,Ive did have problems flying over land but seems ok now,im just getting these weird images on the ground,im no expert so pardon the pun, Thanks for your time,i would be greatful if anyone new?

    Reply With Quote Reply With Quote

  3. #3
    Can you be more specific? I can't see any weird images in your pic.
    Reply With Quote Reply With Quote

  4. #4
    sorry im no wizz kid at this,but if you look at the island,you will see the jagged textures?,top screen
    Reply With Quote Reply With Quote

  5. #5
    Its probably the settings you are running at.You can increase various settings ingame,but it will have an impact of performance.
    You will get a lot more help and advise at the 1C CoD forum.
    Reply With Quote Reply With Quote

  6. #6
    oh right,do you have the link,sorry,thanks for the help,if anyones knows how to edit the config or any help i would be very greatful! best regards josh
    Reply With Quote Reply With Quote

  7. #7
    Banned
    Join Date
    Apr 2011
    Posts
    1
    Huh, didn't know IL2 CoD was released on consoles.

    Reply With Quote Reply With Quote

  8. #8
    I get this aswell but i am having to use quite low settings just to get it to run at all.
    Reply With Quote Reply With Quote

  9. #9
    well when i first got this other day from steam i couldnt run it at all,firsty i put forests to off,turned grass off too, then mest around with the config! this is myne below,try if you want to? im DX9 win xp 32,3200ghz,2gb,gtx260. game setting are on full apart from forests and grass.flying is fine over terrain.still get problems trying to change uniforms with pilots as they disappear.

    [BOB]
    EpilepsyFilter=0

    [window]
    DepthBits =24
    StencilBits=8
    DrawIfNotFocused=0
    SaveAspect=0
    Render=D3D10_0
    width=1280
    height=1024
    ColourBits=32
    FullScreen=1
    ChangeScreenRes=1

    [NET]
    speed=25000
    localPort=27015
    serverName=TEST 123
    serverDescription=IL-2 Sturmovik: Cliffs of Dover
    serverInfo1=5MB\s upload
    serverInfo2=
    serverInfo3=
    serverInfo4=
    VAC=1
    maxPlayers=20
    socksEnable=0
    socksHost=
    socksPort=1080
    socksUser=
    socksPwd=
    host=84.58.70.248
    port=27015
    localHost=

    [Console]
    IP=20001
    UseStartLog=1
    WRAP=1
    PAUSE=1
    HISTORY=1024
    HISTORYCMD=1024
    PAGE=20
    LOG=0
    LOGTIME=0
    LOAD=console.cmd
    SAVE=console.cmd
    LOGFILE=log.txt
    LOGKEEP=0

    [rts]
    tickLen=30
    ;ProcessAffinityMask=15
    maxTimerTicksInRealTick=20
    ; 0 - not use, 1 - show cursor and not capture, 2 - not show cursor, and capture
    mouseUse=2
    ; 0 - not use, 1 - use if hardware exist
    joyUse=1
    ; 0 - not use, 1 - use if hardware exist
    trackIRUse=1
    DisableIME=0
    culture=en-GB

    [rts_mouse]
    SensitivityX=1.0
    SensitivityY=1.0
    SensitivityZ=1.0
    Invert=0
    SwapButtons = 0

    [rts_joystick]
    FF=1

    [core]
    RandSeed = 0
    TexQual=3
    TexFlags.PolygonStipple=0
    Shadows=0
    SpecularLight=2
    DiffuseLight=2
    DynamicalLights=1
    MeshDetail=2
    LandShading=2
    LandDetails=2
    Sky=3
    Forest=4
    VisibilityDistance=3
    LandGeom=2
    DrawCollisions=1
    Water=-1
    Effects=2
    EffFlags.Light=1
    EffFlags.SpriteRender=0
    Grass=-1
    CordEffect=1
    UseFog=0
    UseLandCube=1
    UseLandConnectedObject=1
    LinearObjectManager=1
    Roads=-1
    Sun=1
    Clouds=1
    EffFlags.LightSpritesProj=1
    ShadowMapSize=5
    TexFlags.AsyncLoad=1
    TexFlags.ShowTexture=0
    SimpleMesh.SWTransform=0
    SimpleMesh.QuadTreeClip=1
    SimpleMesh.InstancingHW=1
    EffFlags.LightContextSprites=1
    CloudsFlags.Detailed=1
    TexFlags.CreateHDR=1
    Decals=2
    EffFlags.SWLight=0
    TexFlags.CockpitOnePass=0
    MegaTexture=0
    TexFlags.Reflection=0
    RenderTargetQual=3
    MSAA=2
    MeshStatics=0
    MeshStaticsDetail=4
    SimpleMesh.QTNoCompose=0
    MeshFirstLod=0
    MeshShowLod=0
    SpawnHumans=0
    TexFlags.FastTransparency=1

    [sound]
    SoundUse=1
    DebugSound=0
    SoundEngine=1
    Speakers=1
    Placement=0
    SoundFlags.reversestereo=0
    RadioFlags.Enabled=1
    RadioEngine=2
    MusicVolume=14
    ObjectVolume=7
    MusState.takeoff=1
    MusState.inflight=1
    MusState.crash=1
    MusFlags.play=1
    MasterVolume=14
    Attenuation=7
    SoundMode=0
    SamplingRate=0
    NumChannels=2
    SoundExt.occlusions=1
    SoundFlags.hardware=1
    SoundFlags.streams=1
    SoundFlags.duplex=1
    SoundExt.acoustics=1
    SoundExt.volumefx=1
    SoundFlags.voicemgr=1
    SoundFlags.static=1
    VoiceVolume=8
    Channels=1
    SoundFlags.bugscorrect=0
    SoundExt.extrender=0
    SoundSetupId=8
    ActivationLevel=0.02
    Preemphasis=0.8
    RadioLatency=0.5
    AGC=1
    PTTMode=1
    RadioFlags.PTTMode=0
    RadioFlags.PlayClicks=1
    ActLevel=9
    MicLevel=10
    SoundFlags.UseRadioChatter=0
    SoundFlags.AutoActivation=0
    SoundFlags.forceEAX1=0
    speakers=1
    Reply With Quote Reply With Quote

  10. #10
    Is this the config located in my docs?
    Reply With Quote Reply With Quote

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •