Blazing Angels 1.02 update | Forums

[jedsa]

Hi have the Logitech Extreme 3D Pro. Remap your joystick on the game (Balzing angels) Settings. My joystick works 100% now!!!

Originally posted by ogir91:
Helo,

Which joystick do you have? ?
How do you have remapped all the buttons, x, y, z, axis ?

Thank you for your help.

[Helo_]

ogir91

I have the Saitek ST290 Pro joystick.

Mapped like this...

Follow Camera - button 5
Turn Left - slider up
Turn Right - slider down
Pitch up - button 13
Pitch down - button 14
Primary fire - button 1
Secondary fire- button 2
Closest threat- button 3
Next objective- button 4
Landing gear - button 6
Roll right - Z axis right
Roll left - Z axis left
Speed up - button 15
Slow down - button 16

the rest of the options on the list don't apply to my joystick as it only has 7 buttons. I know that some of the options seem odd, such as slider up/down for turning, but it makes the joystick work properly, so I went with it.

hope this helps

Helo

[Netwarrior1]

Thanks UbiRazz for the patch link. Haven't tried it myself yet - fingers crossed. It's good to at least get some info and the patch released. It confirms we've not been forgotten.

Net

[Netwarrior1]

OH CRIPES - HOW BLOODY HARD IS IT TO GET THIS RIGHT UBI??????

Have installed both patches and guess what - joystick controls are still ****!

Logitech Extreme 3D Pro. After patch 1.02 the joystick controls still won't match properly! When I try to set the turn L and R axis - which should obviously be the yaw - what does it recognise? THE DAMN SLIDER - Left = Up and Right = Down!!!!!!! And the slider won't turn the plane in the yaw axis in game mind you....

And the fun doesn't stop there! If I do set the Turn L and R as above to Slider (even though I've turned the yaw axis) it says it conflicts with the throttle which has a default of the slider up and down - and when I try to map the slider it says that it's BUTTON 17 !!!!!!!

And despite all these settings, the pitch up and down won't work in game despite the settings saying it should be right, the yaw left and right controls the throttle (despite the default turn L and R saying slider), and the damn slider might as well not be there cause it does nothing!!! FYI, my joystick config in windows and every other game is fine so I know that it's just crappy programming on the programming staff's behalf.

And it's now too late for me to return this flawed game to where I bought it.

UBI, IF YOU CAN'T GET IT RIGHT YOU SHOULDN'T HAVE RELEASED THE PATCH. NEVER AGAIN WILL I BE BUYING A **** UBISOFT GAME - AND THE SOONER UBI GOES OUT OF BUSINESS THE BETTER OFF WE'LL ALL BE!

[Cold_Air]

OH YOU ******* WIMP!!!!

"oh my controller doesn't work... mommy!!!!"

would you listen to yourself, use a damn keyboard or something.

nobody wants you hear you nagging so ****

[Acemike99]

Originally posted by Cold_Air:
OH YOU ******* WIMP!!!!

"oh my controller doesn't work... mommy!!!!"

would you listen to yourself, use a damn keyboard or something.

nobody wants you hear you nagging so ****

yeah no kidding I beat this game with mouse and keyboard and I can do ok in online (if i can find a game lol)

[spn_237]

Blazing Angels (PC)patch v1.02 does not work with a Logitech Extreme 3D Pro joystick. The following issues are present with this patch:

1. Speed up/Slow Down function does not work with the Logitech speed slide. Any attempt to reset the speed function to this slide will lockup the Blazing Angels setting application.


2. You have assigned the speed control to what should be the Logitech rudder control. When you twist the joystick to the left, the plane speeds up, when you twist the joystick to the right, the plane slows down. The is no rudder control at all.

3. When attempting to assign a function to other Logitech Extreme 3D Pro buttons, your v1.02 patch will automatically assign the function to "Joystick Button 18". This joystick only has 12 buttons/keys.

[RMcSlash]

Logitech Extreme 3Dpro working with no problems, please check my post higher on the page; http://forums.ubi.com/eve/forums/a/tpc/f/4281085773/m/8...791035654#7791035654

[Johnson_Gunnar]

buttons for axis and such stuff is NOT what i consider "work with no problems"! Your efforts are
good, thanks, but there still has work to be done!

To UBI:
Support didnt answer my request at all, for 2 weeks now, what else am i supposed to do, what actually is YOUR job? Work harder!

[RMcSlash]

While the BA set up calls it buttons it is actually the throttle slider that does the job like it is supposed to do.
Set up refers to twist as a slider but the actual twist isa what is being mapped, when you twist the stick.