Transport columns dont show | Forums

[XyZspineZyX]

I have just started using the FMB to create some missions for online use and would like to include a few vehicles so that ground attack pilots have a moving target to engage.
Problem is that although everything looks hunkey dorey in the editor as regards waypoints and arrival times, the vehicles do not appear.(from static camera or from the air)
Timeout is setto 0,0
Any advice on this would be greatly apreciated.

BadHat

[XyZspineZyX]

I have just started using the FMB to create some missions for online use and would like to include a few vehicles so that ground attack pilots have a moving target to engage.
Problem is that although everything looks hunkey dorey in the editor as regards waypoints and arrival times, the vehicles do not appear.(from static camera or from the air)
Timeout is setto 0,0
Any advice on this would be greatly apreciated.

BadHat

[XyZspineZyX]

Hi

DF or COOP? If I remember right, you can't use moving objects in a DF map. Not sure about this though.
Otherwise, have you checked the starting point with e.g. static camera? Sometimes obstacles (even a single tree) makes columns and especially tanks to driving circle for ages before they find a "clear path".

That's all I can think of...

Regards
- POrsimo

[XyZspineZyX]

Iv experienced transport columns not being able to cross a bridge.. that may have caused your column not arriving at its last waypoint

[Tully__]

No moving ground objects will show in DF maps and according to the manual if you include them in DF's the hosting machine may crash or lock up. They work fine in Coops though.

<center> ================================================== ========================= </center>

<center> <img src=http://members.optusnet.com.au/tully_78th/Corsair.jpg> </center>

<center> The "under performing planes" thread [img]/i/smilies/16x16_smiley-wink.gif[/img] </center>
<center> Forum Terms of Use </center>


Salut
Tully

[XyZspineZyX]

Thanks guys.

Badhat.