Can "center" button be mapped to joystick with TIR2 ? | Forums

[Sturmtrooper]

Well , can it ?
If so , I'm having a tough time figuring out how .
Any help would be appreciated .

Nissan 300ZX V-6,DOHC,Twin Turbocharged,2970cc,300+hp - What I drive .

[Sturmtrooper]

Well , can it ?
If so , I'm having a tough time figuring out how .
Any help would be appreciated .

Nissan 300ZX V-6,DOHC,Twin Turbocharged,2970cc,300+hp - What I drive .

[Arms1]

i use a msffb2 stick and was able to map it, i first had to change centre button in tir software to the #1 key on number pad then mapped my #3 button to the numberpad 1 in the sidewinder software, might be an easier way but this worked for me, good luck!

[x6BL_Brando]

I don't see why not, if you have a programmeable stick - what have you got?

[FG-56th_Lamb]

Sturmtrooper...I have a FF2 stick with my x-45 Hotas. I have a setup using TIR and the center key mapped so it will work. E-mail me or private message me and I'll talk u thru it if u need.

[Sturmtrooper]

Hey Lamb, good to hear from you .
I am using a Saitek Cyborg Force 3D .
I was using a MSFF2 but the darn thing started to wear out on me .

Nissan 300ZX V-6,DOHC,Twin Turbocharged,2970cc,300+hp - What I drive .

[Sturmtrooper]

Still can't get it to map .

Nissan 300ZX V-6,DOHC,Twin Turbocharged,2970cc,300+hp - What I drive .

[T_O_A_D]

You have too use your saitek profiler software and program it the way you want. I have it on my bottom hat button on the joy stick, when I push it forward, it activates TIR center. But thats for x-45 not the Micro stick. But since your hand is on the x-45 throttle you could use one of its buttons or hat or mouse thing, after you set them up as a 4 or 8 way button with your profiler.

Have you checked your Private Topics recently?
131st_Toad's Squad link
My TrackIR fix, Read the whole thread
2.11 drivers


[This message was edited by T_O_A_D on Wed January 21 2004 at 05:06 AM.]

[FG-56th_Lamb]

Sturmtrooper......can't u use the settings and recording with teh Cyborg? like the one that comes with FFB2. I mapped my TIR and center to the up key on the hat switch.

[Sturmtrooper]

For some reason when I am in the TIR hotkeys page , the software won't recognize when I push ANY joystick button . It only recognizes the keyboard .
And if I map the button to the same key in the controls of FB , it won't respond when I push it .
Weird though , in mouse mode (not enhanced) it does work . I can map a center button to the joystick and it kind of centers it . In increments though .
When in enhanced mode and I try to map the center to the joystick it kinda acts like there is a conflict ( you know like when you try to use your hat button with TIR at same time ). It jerks a little bit but won't return to center .
This is confusing for me but there has to be a way for this to work . I'll keep trying .

Nissan 300ZX V-6,DOHC,Twin Turbocharged,2970cc,300+hp - What I drive .