Go
New
Find
Notify
Tools
Reply
  
  Login/Join 
Posted
PLEASE HELP!

Athe the starting of blazing angels 1, i start the first mission - training. The game is still running but it only leaves me with the screen of the base and little guys running around. Why is this happening. I have installed this game 3 times and it still dose the same thing. so please tell me wat to do to fix this problem. i do have windows xp with really good updated hard ware. Smash
 
Posts: 2 | Registered: Sat February 21 2009Reply With QuoteEdit or Delete MessageReport This Post
Ubisoft Technical Support
Posted Hide Post
Hi xxgsnipexx,

First off, make sure you have both patches applied, the 1.01 and the
1.02 patches. The patches can be found at the link below if you don't have
them yet. http://www.ubi.com/US/Downloads/Info.aspx?dlId=1579. Be sure that you install the patches in order and only once each. Do not install either one of these patches more than once; it may corrupt the installation if you do so.

Before going into the Blazing Angels settings, make sure you
recalibrate your joystick in the Game Controls within the Control Panel. You'll
need to do this to ensure that Windows and the game will correctly
detect your joystick or gamepad. Also, if you have any software that you use
for your Saitek, Logitech, Microsoft, or any other joystick software;
try changing the settings for the throttle
and rotary controls to the halfway position. If you can't find an option
to calibrate the joystick or gamepad, you may have to remove any
software your controller might have installed to get to this. I've seen a few
that will override the option to calibrate your input device.

While configuring the joystick in the settings for Blazing Angels, make
sure you keep the throttle at the halfway position at all times (You
can ignore this if you have a gamepad, unless your gamepad does have a
throttle key on it). Also, remap every button in the settings to your
joystick, some of the buttons are not automatically set to what your
joystick uses. Just to give you an idea of how I have my joystick and/or
gamepad is setup, the button configurations that I have are listed below.

Controls for the Joystick:

Follow Camera: Joy Button 3
Turn Left: Slider Up (I know this looks odd, but the settings doesn't
seem to word it correctly; I twisted my joystick left for this action)
Turn Right Slider Down (Same thing as Turn Left, but this time I just
twisted the joystick right.)
Pitch Up: Joy Button 14
Pitch Down: Joy Button 13
Primary Fire: Joy Button 1
Secondary Fire: Joy Button 2
Closest Threat: Joy Button 5
Next Objective: Joy Button 6
Landing Gear: Joy Button 11
Roll Right: Z-Axis Right
Roll Left: Z-Axis Left
Speed Up: Joy Button 17
Slow Down: Joy Button 18

Controls for the Gamepad:

Follow Camera: Joy Button 6
Turn Left: Z Axis Left
Turn Right Z Axis Right
Pitch Up: Joy Button 14
Pitch Down: Joy Button 13
Primary Fire: Joy Button 8
Secondary Fire: Joy Button 7
Closest Threat: Joy Button 1
Next Objective: Joy Button 2
Landing Gear: Joy Button 5
Roll Right: Slider Down (I know this looks odd, but the settings
doesn't seem to word it correctly, I moved the Right Analog stick right for
this action.)
Roll Left: Slider Up (I know this looks odd, but the settings doesn't
seem to word it correctly; I moved the Right Analog stick left for this
action.)
Speed Up: Joy Button 15
Slow Down: Joy Button 16


This is just what I felt comfortable with; you can change it around as
you see fit though, this is just to give you an idea of what it could
look like. I have tested it with this setup and it works just fine as
well, I have no problems flying the plane. So it may just need some
simple "tweaking" of the button configuration in the settings to get it
right. Again, keeping the throttle at the halfway position is important to
configuring the buttons in the settings if you’re using a joystick. I hope
this helps.

If you want to know which joystick I have used with these flight sims, I
have been using the Logitech Extreme 3D Pro and a Saitek P2900 Wireless
Pad.
 
Posts: 155 | Registered: Tue July 06 2004Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
Ok thx alot Smile
 
Posts: 2 | Registered: Sat February 21 2009Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
As long as wer're on the subject,,does anyone know if a Saitek AV8R-01 will work on this game for the PC format? I tried it on the demo and the game didnt recognize the joystick but the computer did.Apparently patches dont work for demos. It said "No version of this game was found" I suspect this was my problem. I need the full PC version to start,, so I have this game on order.
I have read that a lot of people are having trouble with joysticks for this game but I havent heard much at all about demos.
Any thoughts on this??? thnx
 
Posts: 3 | Registered: Thu June 18 2009Reply With QuoteEdit or Delete MessageReport This Post
Ubisoft Technical Support
Posted Hide Post
Since I don't have that joystick, I can't say for sure if it will work or not. If someone could reply who has used this joystick and can confirm the Saitek AV8R-01 works with Blazing Angels 1.
 
Posts: 155 | Registered: Tue July 06 2004Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community