ok I got my Attack 3 working on BA 1, not tested this on BA 2 yet.

first I set my stick to Joystick 2. (I have a N52Te pad which registers as 1)

set the throttle to mid-point (Zero) - this is the KEY to getting this working.

remap the stick in each up / down / left / right axis.(select the axis, remap, move stick) if you see Joystick 15, the Throttle is not in the Zero position.

once done remap keys as you need to.. eg they have primary fire set to 8 or 9 instead of 1....

save and test.

this worked for me and I hope I explained it well enough to be followed. it seems the throttle controls are buggy (go figure) and jam the joystick code resulting in any return from the stick reading as Joystick 15. zero the slider, forget it and use the keyboard.

I've tested this on 2 machines with the BA 1 from Steam and it's worked fine. little sticky on the up/down, but flyable.


hope this helps...