|
|
To disable a time bomb, you need to cut the hot wires.
How do you do that?
1- You put your heat vision and try to identify the wire that appears in red (heat);
2- Chose that wire - your remote will start vibrating;
3- Press " X " to cut the wire.
4- The regular model of time bombs has four wires. You need to cut them all. Also, you only have 20 seconds ( so so )to do the process, or your body will occupy vary parts of the place where you are, gotcha?...
|
| |
|
|
|
Don't cut the wires that aren't hot, righth. That's a ticket to visit Our Maker...
|
| |
|
|
If you guys are talking of the last level in the game that starts on the rooftops I had trouble with that mission a bit; but made a solution! It takes a lot of work but this works. Each time you fail the mission, or die of a bomb, try getting the combinations o each bomb itself & write the combination down on paper, so if you die you can restart and try agian until you gfet the full codes. I did this for all bombs & it worked well - only problem is time limit occurs! Try it. --Ghost
-----------------
-GhostAssassin
"War is my game - A game of Skill & Patience to win it all"
|
| |
|
|
|
1... switch to EMP vision (Press the arrow button up). then you locate the wire you most cut.( the one thats glowing. 2.... switch back to normal mode and cut the wire. 3.... Repeat the sequense. by a friendly helper  |
| |
|
|
|
quote: Originally posted by KzooWildman:
Im having the same problem with defusing the four bombs on the supertanker. I use the EMF vision, choose the "hot" wire, cut that wire and go onto the next bomb. I have cut the correct wires in each of the bombs before 20 seconds expires and they still blow up. I have tried all possible 16 cominbinations that exist and nothing has worked. Also the Captain never says I only have three mintues left. Either Im missing something before this or I am being utterly retarded. Anyone have any tips?
The captain should change the time once you defuse the first bomb (XBOX version). |
| |
|
|
|
I am also stuck here......i do the EMF method but not given an option of a wire to cut!! As soon as i press X the clock instantly goes to zero and blows????
Any help??
Thanks
|
| |
|
|
quote: Originally posted by newaly1971:
I am also stuck here......i do the EMF method but not given an option of a wire to cut!! As soon as i press X the clock instantly goes to zero and blows????
Any help??
Thanks
You need to switch back and forth between visions. Use the EMF to see which wire to cut, then go back to the normal vision to highlight that wire and cut it. Rinse and repeat.  -------  "Tonight's forecast...dark." |
| |
|
|
|
Thamkyou very much..........I now realise I was only trying to cut one wire and not four on each bomb.
Thanks again.
|
| |
|
|
I never use EMF. I just select them and wait 'til my pad vibrates
|
| |
|
|
|
need help
i can disable three bombs. but the last one always blows up. i identify the wire, cut it, the counter starts and a few seconds later i am dead. any ideas?
|
| |
|
