Hi just installed Il-1946 and i got everything up and running the only issue is that the throttle wont work. I went to the hotas control and changed the power to -z-axis but when i use the throttle in game it only jumps from 55% to 110% or visa versa. i have tried multiply time to recal. the -z-axis i also tried to reinstall the drivers, unplug and plug in again and calibrate the joystick in and out of the game. I had PF before and i didn't have this problem with this controller at all. If anyone knows how to resolve this it would be much appreciated. But until the mean time back to silent hunter 4, someone's got to sink those tin cans.

Just copy your conf.ini from your old PF main folder into the 1946 folder and 1946 should work just like PF did. You can copy your users/<yourname>/ folder over too to get the same button and key commands in 1946. Start the Saitek Profile Editor to make sure it's not a hardware failure.

Got the same isue with my Saitek Cyberog Evo Force.

Easy fix for it.

Before you start the game in a Menu screen, use all axes full, so move the stick back forward, left right, turn ruder full left and right, and push the throttle forward and backwards, than start the game and it should be fine.
Use the Axis All the way or it wont work properly.

If you forget to do this you can also do this on the ground, If you had a Airstart you can do it in the air if you do it fast, if your in a bomber in the air you can use Level Stabilizer to hold it level wen you do this quick.

Should al be perfectly fine after that, somehow the game just doesnt see the axes correctly wen it starts, everything else works fine.

That stick uses auto calibration. Camp got it. You need to re-calibrate it every time you turn your computer on.

I got the same stick and once its done it fine.