ubi.com    Forums  Hop To Forum Categories  Driver  Hop To Forums  Driver - General Discussion    Changing resolution in PL
Go
New
Find
Notify
Tools
Reply
  
  Login/Join 
Posted
I can't run the game. My monitor is not capable of any resolution except 800x600 with 60Hz refresh rate (it's a really old one). The game runs at 1024x768 and I can't even see menu to change it to 800x600. I've found a file in Document and Settings\$Username\My Documents\My Games\Driver Parallel Lines, but if I change resolution there with a hex-editor the game also starts in 1024 and reverts config back to default. What should I do?
 
Posts: 4 | Registered: Mon June 25 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
Here's my config after setting it to 800x600 60hz.. you might want to try overwriting your one with it in case theres more than one place for the res in it..
800x600 Config file

and if that doesn't work then you could try this handy Universal Res changer dll..
Resolution Force DLL

you just copy both the .dll and the .ini to the games main directory and edit the .ini to the res you require, I use it all the time of DirectX games that don't support 1440x900 but it works with lower res too.. (not tried with DPL though)
 
Posts: 97 | Registered: Sun December 02 2001Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
Thanks for you reply...
That didn't help =(
Wrong Hz I suppose
 
Posts: 4 | Registered: Mon June 25 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
Could you, please, set it to 640x480 and let me try?
 
Posts: 4 | Registered: Mon June 25 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
there's a way for set a resolution like 1920x1080?
 
Posts: 14 | Registered: Fri April 20 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
hmmm.. sounds like the game isn't seeing that your monitor is capable of 800x600...

Have you got the correct monitor listed in display properties?

"Default Monitor" causes lots of these sort of problems in games, if not you could just install the "Standard Display>800x600 Digital Flat Panel" Driver that comes with windows under device manager/display properties which would force the game to a max of 800x600 60hz
 
Posts: 97 | Registered: Sun December 02 2001Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
Thanks, it worked for me...
 
Posts: 4 | Registered: Mon June 25 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
quote:
Originally posted by radtweak:
Here's my config after setting it to 800x600 60hz.. you might want to try overwriting your one with it in case theres more than one place for the res in it..
800x600 Config file

and if that doesn't work then you could try this handy Universal Res changer dll..
Resolution Force DLL

you just copy both the .dll and the .ini to the games main directory and edit the .ini to the res you require, I use it all the time of DirectX games that don't support 1440x900 but it works with lower res too.. (not tried with DPL though)


Please can you send me the complete thing to lukeymiller123@live.co.uk
 
Posts: 3 | Registered: Mon April 13 2009Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
quote:
Changing resolution in PL

hello..

how to change the resolution of graphics card in my xorg.conf?
I don't wan't to use graphical druid I only won't to change resolution in file xorg.conf,how to do this ?

Openbox,Arch Overlord 32bits

Regards...

Rocky
__________________________________________________________________________
pass hair follicle drug test | Photo to Pop Art | Prada Handbags

This message has been edited. Last edited by: Rocky091986,
 
Posts: 7 | Registered: Sat September 05 2009Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community  
 

ubi.com    Forums  Hop To Forum Categories  Driver  Hop To Forums  Driver - General Discussion    Changing resolution in PL

Terms of Use

Privacy Policy