PDA

View Full Version : Getting really frustrated



wimaine
03-18-2004, 07:06 AM
I'm doing everything like the pictures say. The pendulums are at Left-Middle, Middle-High, and RIght-High. I tried other settings, but they didn't work, either. The cylinder wheel is set with the two farthest away with the ringed part of the cylinders facing out. THe one closest to me is smooth end out.... the other 2 pics look just like the book. I don't know what I'm doing wrong.

Also, I have all the color posts pointed at each other, in the right order, but the colors are still not showing up on the leaf door. Is there something else I need to do first? Yes, the first light post (before the yellow one) is working.

wimaine
03-18-2004, 07:06 AM
I'm doing everything like the pictures say. The pendulums are at Left-Middle, Middle-High, and RIght-High. I tried other settings, but they didn't work, either. The cylinder wheel is set with the two farthest away with the ringed part of the cylinders facing out. THe one closest to me is smooth end out.... the other 2 pics look just like the book. I don't know what I'm doing wrong.

Also, I have all the color posts pointed at each other, in the right order, but the colors are still not showing up on the leaf door. Is there something else I need to do first? Yes, the first light post (before the yellow one) is working.

BobF
03-18-2004, 07:41 AM
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by wimaine:
I'm doing everything like the pictures say. The pendulums are at Left-Middle, Middle-High, and RIght-High. ***(Left pendulum at bottom and right two at mid)*** I tried other settings, but they didn't work, either. The cylinder wheel is set with the two farthest away with the ringed part of the cylinders facing out. THe one closest to me is smooth end out.... the other 2 pics look just like the book. I don't know what I'm doing wrong.

Also, I have all the color posts pointed at each other, in the right order, but the colors are still not showing up on the leaf door. ***(If no light is shining on the door you need to start over)*** Is there something else I need to do first? ***(Start at the ocean and look through the lense, where light comes in, to see where it should be shining.)*** Yes, the first light post (before the yellow one) is working.<HR></BLOCKQUOTE>

creatorabc
03-18-2004, 02:26 PM
Hi
Light Puzzle
On the matter of getting the lights lined up, I travelled from the first light location to the next light. You must look through the light post to see where to go next. The final light post should point to the door.
Puzzle 2
If you are referring to the small room at the bottom of the elevator shaft, use the book to set up all three mechanical devices. Remember that detail of the positions of each piece must replicate the books description. The pendulums have the three positions. Good luck

NadiaR
03-18-2004, 10:25 PM
Check the pendulums again....they can slide two levels down right?....This one had me stuck the first time I did it. http://ubbxforums.ubi.com/images/smiley/16x16_smiley-wink.gif