BSOD when playing Raven Shield

[LightSystem]

Hi all!
I installed Raven Shield and when I as happily going to play everything seemed normal. But then i started to receive randomly a BSOD saying:

DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop: 0x000000D1
P17.sys- Address F219E902 base at F2170000, DateStamp 3F2F14E4.

At first I though It happened because the game was installed on my slave hard drive, but when i instaled it on my C: it got worst, i get the BSOD few secs after starting a mission. Then i run a program called "MemTest 3.1a" to see if my RAM had any errors. The program didnt detect any. This only happens with this game.Please Help . http://forums.ubi.com/images/smilies/cry.gif
Specs:
Win XP Home Edition SP2
Dual Slots 256MB DIMM RAM
P4 1.7GHZ
Geforce FX 5600 XT latest drivers (61.77)
DFI NB71-BC
Creative SB Audigy LS

[LightSystem]

Hi all!
I installed Raven Shield and when I as happily going to play everything seemed normal. But then i started to receive randomly a BSOD saying:

DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop: 0x000000D1
P17.sys- Address F219E902 base at F2170000, DateStamp 3F2F14E4.

At first I though It happened because the game was installed on my slave hard drive, but when i instaled it on my C: it got worst, i get the BSOD few secs after starting a mission. Then i run a program called "MemTest 3.1a" to see if my RAM had any errors. The program didnt detect any. This only happens with this game.Please Help . http://forums.ubi.com/images/smilies/cry.gif
Specs:
Win XP Home Edition SP2
Dual Slots 256MB DIMM RAM
P4 1.7GHZ
Geforce FX 5600 XT latest drivers (61.77)
DFI NB71-BC
Creative SB Audigy LS

[Philipz]

Have you checked you system resources for IRQ conflicts?

[LightSystem]

No how do I do that?

[Gunny Highway]

Also the p17.sys is part of the driver for your soundcard maybe you should reinstall drivers.

It would probably be a good idea to unistall/install this way:

Try uninstalling your audio card drivers and reinstall them again, as listed below.


<LI> Uninstall audio drivers in Windows Control Panel
<LI> Reboot into Safe Mode.
<LI> Use Driver Cleaner + Cab Cleaner @ DriverHeaven.net (http://www.driverheaven.net/cleaner) tool to remove all references and files drivers left. You can use other cleaners too.
<LI> Reboot.
<LI> Install drivers of your choice.


The Cleaner supports Creative too.

[Philipz]

Control Panel &gt; System &gt; Hardware &gt; Device Manager

[LightSystem]

I reinstalled the driver and everything seems just fine.
Thank you guys.