Weather editor bug : turbulence speed

[XyZspineZyX]

Every time one clicks OK to validate a change in the weather settings of a mission, the turbulence speed is multiplied by 3,3.

Lets say the initial turbulence speed was set to 10 ft/s, click OK, reopen the weather settings screen, you got 33 ft/s. Click OK again, got 99 ft/s. The max speed is 328 ft/s (try to takeoff with this TS... shake it baby !).

Looks like auto-conversion from m/s to ft/s... /i/smilies/16x16_smiley-very-happy.gif

ASUS A7N8X / AMD 2700+ / 512 MB RAM / ATI 9500/ MS FFB2

[XyZspineZyX]

Every time one clicks OK to validate a change in the weather settings of a mission, the turbulence speed is multiplied by 3,3.

Lets say the initial turbulence speed was set to 10 ft/s, click OK, reopen the weather settings screen, you got 33 ft/s. Click OK again, got 99 ft/s. The max speed is 328 ft/s (try to takeoff with this TS... shake it baby !).

Looks like auto-conversion from m/s to ft/s... /i/smilies/16x16_smiley-very-happy.gif

ASUS A7N8X / AMD 2700+ / 512 MB RAM / ATI 9500/ MS FFB2

[XyZspineZyX]

I was just about to post on this...

Yeah, I'm getting this too. Actually, here's what I was gonna post:

First, I can't set the turbulance any higher than 33 ft/sec. That seems ok, though. But whenever I come back to the screen, it always is set higher than 33. If you continue comign back to the screen, it will continue to multiply till it gets to 328, then stops doing. All three meters will just stop at 328.

http://www.x-plane.org/users/12thiaptbone/pgraptor.jpg

[XyZspineZyX]

I have experienced the exact same thing.

Windows XP pro
MB EPOX nFORCE2 EP-8RDA+
Maxtor ULTRA ATA/133 7200rpm 120GB - 8mb cache
POWER SUPPLY ANTEC TRUE550 ATX
CPU AMD|2400/266 ATHLON XP TBRED
GAINWARD TI4200 128MB X4 AGP
DDRAM 512MB 32MX8 PC-3200C corsair