XyZspineZyX
06-19-2003, 05:02 AM
What controls the color of the props on the 111 series?
Somehow all my HE 111's are now mixed gray and black. Here's a close-up on a screen shot ...
http://home.attbi.com/~vclayman/HE111_Problem.jpg
Is the default gray or black on the props? How are they matched and what controls this?
I have heard that on the La series there is small square (5x5 pixels) located in the top left corner inside the elevator outline that is the color patch for the prop?
http://www.mycolorado.info/Temp/temp.jpg
Is this the case and if so where are they located on the 111's?
Any help in this matter would be much appreciated ...
Thanks, clayman
http://home.attbi.com/~vclayman/Sig_at_Netwings_3.jpg
"Half this sim is 200% mental." -Yogi Bernie
Message Edited on 06/18/0310:25PM by clayman_52
Somehow all my HE 111's are now mixed gray and black. Here's a close-up on a screen shot ...
http://home.attbi.com/~vclayman/HE111_Problem.jpg
Is the default gray or black on the props? How are they matched and what controls this?
I have heard that on the La series there is small square (5x5 pixels) located in the top left corner inside the elevator outline that is the color patch for the prop?
http://www.mycolorado.info/Temp/temp.jpg
Is this the case and if so where are they located on the 111's?
Any help in this matter would be much appreciated ...
Thanks, clayman
http://home.attbi.com/~vclayman/Sig_at_Netwings_3.jpg
"Half this sim is 200% mental." -Yogi Bernie
Message Edited on 06/18/0310:25PM by clayman_52