Quick Mission Tuner

[XyZspineZyX]

Hello All,

I've had a lot of fun creating missions in FB, but wanted something to quickly tweak a mission. So I wrote this program to help me out. I'm not some if something exists already, if it does please ignore this post. I'm not even sure if anyone else would find this useful.

You can modify the weather, time and cloud height for a mission. You can also set individual plane attributes within a flight like the skill, plane skin, pilot skin and markings on or off. Or adjust the flights number of planes, skill and fuel load. All this can be done outside of IL2 FB.

Again I'm not sure if this is useful to anyone. I still have to add some saving options and do a bit more testing.

Here's a screen shot:

http://mysite.verizon.net/res19wz2/sitebuildercontent/sitebuilderpictures/qmt.jpg


Shift_E

[XyZspineZyX]

Hello All,

I've had a lot of fun creating missions in FB, but wanted something to quickly tweak a mission. So I wrote this program to help me out. I'm not some if something exists already, if it does please ignore this post. I'm not even sure if anyone else would find this useful.

You can modify the weather, time and cloud height for a mission. You can also set individual plane attributes within a flight like the skill, plane skin, pilot skin and markings on or off. Or adjust the flights number of planes, skill and fuel load. All this can be done outside of IL2 FB.

Again I'm not sure if this is useful to anyone. I still have to add some saving options and do a bit more testing.

Here's a screen shot:

http://mysite.verizon.net/res19wz2/sitebuildercontent/sitebuilderpictures/qmt.jpg


Shift_E

[XyZspineZyX]

Sounds very similar to UberDemon's QMB which is due out in it's final version for the new patch shortly...you should not abandon your efforts, however!

12th IAP "Guards"

http://12iapil2ops.0catch.com/12th_iap_home_page.htm

http://12iapil2ops.0catch.com/guards12.gif

RHAF 5/I Fighter Group
http://12iapil2ops.0catch.com/rhaf.htm

http://12iapil2ops.0catch.com/rhafsmall.gif

[XyZspineZyX]

just needed a place to test something


http://www.vfa25.com/sigs/stormsig.jpg
FIST OF THE FLEET! (http://www.vfa25.com/)

[XyZspineZyX]

Indeed, continue your work. Maybe you and UberDemon could even converse and work together. The more the merrier.

Yea, I like icecream. So what of it?

[XyZspineZyX]

Good idea. What does this offer that the FMB doesn't?

<img src="http://www.geocities.com/agrill101/Sig.jpg.txt"

[XyZspineZyX]

Shifty101 wrote:
- Good idea. What does this offer that the FMB
- doesn't?


Hi Shifty,

I like your handle. :-) It doesn't build or generate missions, it only modifies plane attributes within a current mission. It does this outside of the FMB. I use it after I've created or downloaded a mission and need to tweak it a bit by setting the skill level of a few planes or the time the mission starts without having to go into the FMB.

Thanks for your interest.

Shift_E

[XyZspineZyX]

I took a closer look at that pic you posted and I can see how this would be very useful.

<img src="http://www.geocities.com/agrill101/Sig.jpg.txt"

[XyZspineZyX]

This does look very useful. When can WE have a copy? /i/smilies/16x16_smiley-wink.gif

S! Simon.
<center>


<font color="#000000">It's my attitude not my aptitude that determines my altitude.</font>
http://extremeone.4t.com/images/sig.jpg

[XyZspineZyX]

Extreme_One wrote:
- This does look very useful. When can WE have a copy?


I would be happy to have help testing. Are you offering?

Shift_E

[XyZspineZyX]

A couple of questions / comments...I was under the impression that Uberdemon's program was a klone for the QMB only with more / better options, will it work for FMB as well ?

I like your concept for FMB as I invariably forget to enter the correct number of planes, skill level, ordinance load or check the box for the players plane and don't realize it till I start testing, then I have to scroll around on the map to find the right waypoint, etc. This would be nice as it appears all the flights could be edited at one time.

It would also be nice to be able to scroll through the waypoints of each flight and adjust the altitudes. It seems like I spend more time doing this than almost anything else. I tend to add waypoints and forget to check the altitude and find when I test that planes are doing some radical altitude moves when they should be cruising along in level flight.

I would be willing to help testing.

[XyZspineZyX]

Oops, guess I need to do a better job of reading, I thought I saw an M between the F and B on your first post. Disregard
previous post, sorry for wasting bandwidth !

[XyZspineZyX]

Flak_Magnet wrote:
- A couple of questions / comments...I was under the
- impression that Uberdemon's program was a klone for
- the QMB only with more / better options, will it
- work for FMB as well ?
-
- I like your concept for FMB as I invariably forget
- to enter the correct number of planes, skill level,
- ordinance load or check the box for the players
- plane and don't realize it till I start testing,
- then I have to scroll around on the map to find the
- right waypoint, etc. This would be nice as it
- appears all the flights could be edited at one time.
-
-
-
- It would also be nice to be able to scroll through
- the waypoints of each flight and adjust the
- altitudes. It seems like I spend more time doing
- this than almost anything else. I tend to add
- waypoints and forget to check the altitude and find
- when I test that planes are doing some radical
- altitude moves when they should be cruising along in
- level flight.
-
- I would be willing to help testing.
-
-

You are right on the mark as to what I use this program for. I'm a couple of days away from having the flight's waypoints added to the program. So you can also tune the altitudes and airspeed.

And this tool does not work with the QMB, but does work for the FMB and the campaign missions.

Shift_E

[XyZspineZyX]

Shift_E wrote:
-
- Extreme_One wrote:
-- This does look very useful. When can WE have a copy?
-
-
- I would be happy to have help testing. Are you
- offering?
-
- Shift_E

I'd be very happy to help test this tool out for you!

S! Simon.
<center>


<font color="#000000">It's my attitude not my aptitude that determines my altitude.</font>
http://extremeone.4t.com/images/sig.jpg

[XyZspineZyX]

Extreme_One wrote:
- Shift_E wrote:
--
-- Extreme_One wrote:
--- This does look very useful. When can WE have a copy?
--
--
-- I would be happy to have help testing. Are you
-- offering?
--
-- Shift_E
-
- I'd be very happy to help test this tool out for
- you!
-
- S! Simon.

Excellent! I'll have an install done sometime tomorrow 8-13-2003. I can send it to you if you'd like when I'm finished.

Shift_E

[XyZspineZyX]

OK, then I did read it right, good deal !

I would be interested in trying it too !

[XyZspineZyX]

Flak_Magnet wrote:
- OK, then I did read it right, good deal !
-
- I would be interested in trying it too !
-
-


Okay you're in too. I should have an install tomorrow 8-13-2003. And I updated the screen shot to include the waypoints.

Thanks,

Shift_E

[XyZspineZyX]

To:
Extreme_One
Flak_Magnet

I finished the install and I'm ready for you guys to test it out. If you'd like you can PM your email addresses to me and I'll send you a copy of the install.

Thanks again,
Shift_E

[XyZspineZyX]

I believe I'm finished with the Quick Mission Tuner, just some testing and suggestions. Again this is not a mission generator it tweaks or tunes an existing missions outside of the full mission builder in FB. It will also edit missions created by the dynamic campaign generator in FB.

http://mysite.verizon.net/res19wz2/sitebuildercontent/sitebuilderpictures/qmt.jpg


If anyone is interested in getting a copy let me know.

Thanks,
Shift_E

[XyZspineZyX]

Shift, I tried to send you my E-mail but apparently it didn't go through. Since I already get a ton of SPAM anyway a little more won't be noticed. Please send to garyb@computech-online.net

Thanks !

[XyZspineZyX]

Sure, i'd love to have a copy and try it out.

Yea, I like icecream. So what of it?

[XyZspineZyX]

Flak_Magnet wrote:
- Shift, I tried to send you my E-mail but apparently
- it didn't go through. Since I already get a ton of
- SPAM anyway a little more won't be noticed. Please
- send to garyb@computech-online.net
-
- Thanks !
-

If you think you have to post on open community boards do this.... garybREM@VEcomputech-online.net. A human being recognizes the REMOVE and then sends the Email. Believe me the Spider Bots run the Ubi Boards for addresses.

-------------------- /i/smilies/16x16_smiley-very-happy.gif

[XyZspineZyX]

I've received some excellent feedback and would like to thank them for their interest and help. I believe I'm a couple of days out from adding all the great suggestions. I'd really like to thank Nearmiss for his valuable help.

In a few days I hope you'll have a useful tool to help you tool and manage mission. I may not get to my PMs for a few days.

Thanks,
Shift_E

[XyZspineZyX]

version 1.0.20 is now up and it includes a cool skin manager function which shows the *.bmp for a skin that you may link to a JPG of the plane on your HD...in addition to several other new details!


http://12iapil2ops.0catch.com/downloads.htm

S!

Yuri

12th IAP "Guards"

http://12iapil2ops.0catch.com/12th_iap_home_page.htm

http://12iapil2ops.0catch.com/guards12.gif

RHAF 5/I Fighter Group
http://12iapil2ops.0catch.com/rhaf.htm

http://12iapil2ops.0catch.com/rhafsmall.gif

[XyZspineZyX]

version 1.0.23 up now up...replaces old version at the link above!

S!


12th IAP "Guards"

http://12iapil2ops.0catch.com/12th_iap_home_page.htm

http://12iapil2ops.0catch.com/guards12.gif

RHAF 5/I Fighter Group
http://12iapil2ops.0catch.com/rhaf.htm

http://12iapil2ops.0catch.com/rhafsmall.gif

[XyZspineZyX]

left for you (by email) by Roshko:

Hi - downloaded your mission tuner. Really been missing something like that. Thanx man

I'd really like to be able to switch the A/C type of a flight tho' - so I thought you'd might like a list of the various class.air's in FB. Then u'd have one less excuse for not implementing it

So here it is (Bf110 is missing):

air.AR_196A3
air.F2A_B239
air.BF_109E4
air.BF_109E4B
air.BF_109E7
air.BF_109E7NZ
air.BF_109F2
air.BF_109F4
air.BF_109G2
air.BF_109G6
air.BF_109G6Late
air.BF_109G6AS
air.BF_109G10
air.BF_109G14
air.BF_109K4
air.BF_110C4
air.BF_110C4B
air.BF_110G2
air.BLENHEIM1
air.BLENHEIM4

air.FI_156
air.FW_189A2
air.FW_190A4
air.FW_190A5
air.FW_190A8
air.FW_190A9
air.FW_190D9
air.FW_190D9LATE
air.FW_190F8
air.G50
air.HE_111H2
air.HE_111H6
air.HE_111Z
air.HE_162A2
air.HurricaneMkIa
air.HS_129B2
air.HS_129B3Wa
air.IAR_80
air.IAR_81A
air.JU_52_3MG4E
air.JU_52_3MG5E
air.JU_87B2
air.JU_87D3
air.JU_87G1
air.JU_88A4
air.MC_202
air.ME_210CA1
air.ME_210CA1ZSTR
air.ME_262A1A
air.ME_262A2A
air.ME_321
air.ME_323
air.MS406
air.MS410
air.MSMORKO
air.BF_109G6GRAF
air.BF_109G6HARTMANN
air.JU_87G2RUDEL
air.BF_109G6HEPPES
air.BF_109G6KOVACS
air.BF_109G6MOLNAR
air.BF_109G10FABIAN
air.ME_262A1ANOWOTNY


air.BI_1
air.IL_4_DB3B
air.IL_4_DB3M
air.IL_4_DB3T
air.IL_4_DB3F
air.G_11
air.HurricaneMkIIb
air.HurricaneMkIIc
air.HurricaneMkIIbMod
air.I_153_M62
air.I_153P
air.I_16TYPE18
air.I_16TYPE24
air.IL_2_1940Early
air.IL_2_1940Late
air.IL_2_1941Early
air.IL_2_1941Late
air.IL_2I
air.IL_2MEarly
air.IL_2MLate
air.IL_2T
air.IL_2Type3
air.IL_2Type3M
air.IL_4_IL4
air.LAGG_3SERIES4
air.LAGG_3IT
air.LAGG_3SERIES66
air.LA_5
air.LA_5F
air.LA_5FN
air.LA_7
air.LA_7B20
air.LI_2
air.MBR_2AM34
air.MIG_3EARLY
air.MIG_3UD
air.MIG_3UB
air.MIG_3SHVAK
air.MIG_3AM38
air.MIG_3U
air.P_11C
air.P_39N
air.P_39Q1
air.P_39Q10
air.P_40E
air.P_40EM105
air.P_40M
air.P_47D10
air.P_47D22
air.P_47D27
air.P_51D20NA
air.PBN1
air.PE_2SERIES1
air.PE_2SERIES84
air.PE_2SERIES110
air.PE_2SERIES359
air.PE_3SERIES1
air.PE_3BIS
air.PE_8
air.R_10
air.SB_2M100A
air.SB_2M103
air.SU_2
air.TB_3_4M_17
air.TU_2S
air.U_2VS
air.YAK_1
air.YAK_1B
air.YAK_3
air.YAK_7B
air.YAK_9
air.YAK_9D
air.YAK_9K
air.YAK_9T
air.YAK_9U
air.YAK_9TALBERT
air.I_16TYPE24SAFONOV
air.MIG_3POKRYSHKIN
air.P_39NPOKRYSHKIN
air.P_39Q15RECHKALOV
air.LA_7KOJEDUB


12th IAP "Guards"

http://12iapil2ops.0catch.com/12th_iap_home_page.htm

http://12iapil2ops.0catch.com/guards12.gif

RHAF 5/I Fighter Group
http://12iapil2ops.0catch.com/rhaf.htm

http://12iapil2ops.0catch.com/rhafsmall.gif

[XyZspineZyX]

Yuri_Stupchet wrote:
- version 1.0.23 up now up...replaces old version at
- the link above!
-


Heloo,
I think this is a useful tool from the description and reaction to it. However I can't get it run on my PC.

I'm using win98se. When I start the program it does not generate a window. I can see "Mission Tuner" in task manager and in "System information" I can see that there are also visual basic programs running. The visual basic runtime on my machine is downloaded from the Mudmovers site.

Any idea of what might get this to work?

thanks

<center>
http://www.imgmag.org/images/delta9tetra/lurch-avatar.gif

</center>

[XyZspineZyX]

delta_9_tetra wrote:
-
- Yuri_Stupchet wrote:
-- version 1.0.23 up now up...replaces old version at
-- the link above!
--
-
-
- Heloo,
- I think this is a useful tool from the description
- and reaction to it. However I can't get it run on my
- PC.
-
- I'm using win98se. When I start the program it does
- not generate a window. I can see "Mission Tuner" in
- task manager and in "System information" I can see
- that there are also visual basic programs running.
- The visual basic runtime on my machine is downloaded
- from the Mudmovers site.
-
- Any idea of what might get this to work?
-
- thanks
-

Make sure you have 1.0.23 download and re-install it. If that doesn't fix the problem PM me and I can help you more.

Shift_E

[XyZspineZyX]

I have the 03 version installed.........
after saveing the new settings it re-sets all my delayed start times to zero!!
the I-16 loadouts do not correspond with what i set in the FMB...

it'll be a great tool when it's finished

[XyZspineZyX]

version 1.0.28 is now up and it includes a README file in addition to several other new details!


http://12iapil2ops.0catch.com/downloads.htm


12th IAP "Guards"

http://12iapil2ops.0catch.com/12th_iap_home_page.htm

http://12iapil2ops.0catch.com/guards12.gif

RHAF 5/I Fighter Group
http://12iapil2ops.0catch.com/rhaf.htm

http://12iapil2ops.0catch.com/rhafsmall.gif

[XyZspineZyX]

Yuri,

I just downloaded and installed the Tuner. But I think I got the 1.023 version not 1.028. Can you check to see if the link is looking at the newest version.

Thanks,
BV

<center>http://777AVG.com/sigs/sig01.gif </center>

[XyZspineZyX]

should be fixed now

12th IAP "Guards"

http://12iapil2ops.0catch.com/12th_iap_home_page.htm

http://12iapil2ops.0catch.com/guards12.gif

RHAF 5/I Fighter Group
http://12iapil2ops.0catch.com/rhaf.htm

http://12iapil2ops.0catch.com/rhafsmall.gif

[XyZspineZyX]

I got the latest version but when I start it it gives me this error "Run-time error '-2147319779(8002801d)': Automation error Library not registered. " You have any clue on how I can fix it?

[XyZspineZyX]

Mr.Kilroy wrote:
- I got the latest version but when I start it it
- gives me this error "Run-time error
- '-2147319779(8002801d)': Automation error Library
- not registered. " You have any clue on how I can fix
- it?

One of the controls in the install didn't register correctly. It's hard to tell which one. What OS are you using?

Did you try re-installing?

Shift_E

[XyZspineZyX]

I have reinsatalled it two or three time and it is still the same error. I'm running Windows XP pro.

[XyZspineZyX]

Mr.Kilroy wrote:
- I have reinsatalled it two or three time and it is
- still the same error. I'm running Windows XP pro.
-
Make sure you are logged in as an administrator. If you are an administrator, then run "SFC /scannow" from the command prompt without quotes. Then re-install.


Good luck,
Shift_E

[XyZspineZyX]

Thanks a lot for your work.
It is no less than aSUPER TOOL !!!
Good job !

[XyZspineZyX]

gprr wrote:
- Thanks a lot for your work.
- It is no less than aSUPER TOOL !!!
- Good job !
-

Thank you! I'm glad you find it useful.

Shift_E

[XyZspineZyX]

Thanks for the help Shift_E. I did what you said and it said something about it wanted me to insert my SP 1 cd. I didn't have one so I downloaded the SP 1 again and installed it.

I ran The SFC?scannow again and nothing showed up but i still can't open your program without the same error. Anymore suggestions?

[XyZspineZyX]

Mr.Kilroy wrote:
- Thanks for the help Shift_E. I did what you said
- and it said something about it wanted me to insert
- my SP 1 cd. I didn't have one so I downloaded the SP
- 1 again and installed it.
-
- I ran The SFC?scannow again and nothing showed up
- but i still can't open your program without the same
- error. Anymore suggestions?

No problem happy to help, I hope we'll get it working.

There is a control or object on your system that is not registered correctly. You may want to run "Chkdsk" in your harddrive "chkdsk c: /f" from the command prompt. It will ask if you want to run it on the next restart, type "Y" and restart.

The "SFC /scannow" Scans and verifies the versions of all protected system files on your computer. It will ask to insert your SP 1 cd, insert your WinXP cd.

And you have downloaded version 1.0.28 from Yuri's site? And the download was successful? Just checking. /i/smilies/16x16_smiley-happy.gif

Good luck,
Shift_E

[XyZspineZyX]

I ran SFC?scannow again and it didn't tell me anything. I also ran Chkdsk and it didn't show any trouble.

I downloaded the file again and installed it, but still the same error. Arrggghhh. I really want to try your program. /i/smilies/16x16_smiley-sad.gif

[XyZspineZyX]

Mr.Kilroy wrote:
- I ran SFC?scannow again and it didn't tell me
- anything. I also ran Chkdsk and it didn't show any
- trouble.
-
- I downloaded the file again and installed it, but
- still the same error. Arrggghhh. I really want to
- try your program.

Okay, let's try this:

http://download.microsoft.com/download/vb60pro/redist/sp5/win98me/en-us/vbrun60sp5.exe

I read of other programs having the same problem as you after WinXP SP 1. The link will download a fix for the Visual Basic runtime. Let me know if that takes care of your problem.

Good Luck,
Shift_E

[XyZspineZyX]

Still no work. I haven't resinstalled your program after the fix. I'll try that after work.

[XyZspineZyX]

Still no go /i/smilies/16x16_smiley-sad.gif

[XyZspineZyX]

Mr.Kilroy wrote:
- Still no go

Here's what I got from the Microsoft site:

Microsoft Windows Run-time error '-2147319779(8002801d)' Solution.

Here are the instructions if you do not wish to visit that site or if it seems unclear:


Close all programs.

Login to Windows XP as "Administrator."

Choose Start, Run, and input this command:
regsvr32 vbscript.dll


Windows will indicate that this process succeeded. Click OK.

Again, Choose Start, Run, and input this command:
regsvr32 jscript.dll


Windows will indicate that this process succeeded. Click OK.

Finally, restart your system and the program should run properly.

If this doesn't do it, you have me stumped. /i/smilies/16x16_smiley-mad.gif

Good Luck,
Shift_E

[XyZspineZyX]

Still no luck. Could you put this in laymen terms?


When you unpack the Retail Solution Site, you get the following error:

Run-time error -2147319779 (8002801d)
Automation error
Library not registered

Solution
This problem is external to Commerce Server. You must rebuild your computer because some of the primary DLLs are not registered.

The error is generated by VBScript.RegExp in VBScript.dll. VBScript.dll depends only on system DLLs and Msvcrt.dll.


--------------------------------------------------------------------------------

[XyZspineZyX]

Mr.Kilroy wrote:
- Still no luck. Could you put this in laymen terms?
-
-
- When you unpack the Retail Solution Site, you get
- the following error:
-
- Run-time error -2147319779 (8002801d)
- Automation error
- Library not registered
-
- Solution
- This problem is external to Commerce Server. You
- must rebuild your computer because some of the
- primary DLLs are not registered.
-
- The error is generated by VBScript.RegExp in
- VBScript.dll. VBScript.dll depends only on system
- DLLs and Msvcrt.dll.
-
-
---------------------------------------------------------------------------------

In Layman terms, the computer that the message refers to needs to have the operating system re-installed.

I'm assuming you are signed in as an administrator, you have all the windows updates and you are running a good virus program.

Those dlls should have registered on your computer. If they were corrupt "SFC /scannow" would have corrected them, if they didn't exist the QMT install should have installed and registered them or the last link I sent you should have installed and registered the proper dlls.

So I'm sorry I couldn't help you out, it is a Windows issue so you may want to consider re-installing windows or asking for help in the Tech forum.

Sorry,
Shift_E

[XyZspineZyX]

I appreciate all the help. I may reinstall one of these days. Just wish it wasn't such a pain.

Thanks, again.

[XyZspineZyX]

Hello, I am win98se user. I would appreciate some help to run this program.

If I run QuickMission.exe version 1.00.0000.0028 I don't get a window.

The process starts then immediately begins filling an error log at C:\Program Files\Quick Mission Tuner\ErrorLog.txt like this:



LoadSkinNames Path not found 05/09/03 14:33:49
LoadSkinNames Object variable or With block variable not set 05/09/03 14:33:49
LoadSkinNames Object variable or With block variable not set 05/09/03 14:33:49
LoadSkinNames For loop not initialized 05/09/03 14:33:49
FileLoad Path/File access error 05/09/03 14:33:49
FileLoad Bad file name or number 05/09/03 14:33:49
FileLoad Bad file name or number 05/09/03 14:33:49

......... lots and lots of repeats then ....


FileLoad Overflow 05/09/03 14:34:13
FileLoad Bad file name or number 05/09/03 14:34:13
FileLoad Bad file name or number 05/09/03 14:34:13
FileLoad Overflow 05/09/03 14:34:13
FileLoad Bad file name or number 05/09/03 14:34:13

repeated until I kill the process.


The following .dll's are called, perhaps I have an out of date version of something?


Process: MISSIONTUNER.EXE Pid: FFF82811

Base Size Description Version Time Path
0x1FA0000 0xE000 Control Center 9.70.0000.0000 01/07/02 09:50 C:\Program Files\Logitech\MouseWare\system\CCMSGHK.DLL
0x400000 0x245000 QuickMission.exe 1.00.0000.0028 28/08/03 12:02 C:\Program Files\Quick Mission Tuner\MissionTuner.exe
0xBFE80000 0x10000 Win32 ADVAPI32 core component 4.80.0000.1675 23/04/99 22:22 C:\WINDOWS\SYSTEM\ADVAPI32.DLL
0xBFB70000 0x88000 Common Controls Library 5.81.4916.0400 29/08/02 00:00 C:\WINDOWS\SYSTEM\COMCTL32.DLL
0x202B0000 0x95000 Windows Common Controls ActiveX Control DLL 6.00.0081.0005 22/05/00 16:58 C:\WINDOWS\SYSTEM\comctl32.ocx
0x7FE10000 0x2D000 Common Dialogs DLL 4.72.3510.2300 23/04/99 22:22 C:\WINDOWS\SYSTEM\COMDLG32.DLL
0x217A0000 0x23000 CMDialog ActiveX Control DLL 6.00.0084.0018 02/11/01 16:40 C:\WINDOWS\SYSTEM\comdlg32.ocx
0xBFF20000 0x26000 Win32 GDI core component 4.10.0000.1998 23/04/99 22:22 C:\WINDOWS\SYSTEM\GDI32.DLL
0xBFF70000 0x73000 Win32 Kernel core component 4.10.0000.2222 23/04/99 22:22 C:\WINDOWS\SYSTEM\KERNEL32.DLL
0x277B0000 0xA0000 Microsoft Common Controls 2 ActiveX Control DLL 6.00.0088.0004 22/09/00 14:10 C:\WINDOWS\SYSTEM\MSCOMCT2.OCX
0x66000000 0x153000 Visual Basic Virtual Machine 6.00.0089.0064 21/08/00 11:22 C:\WINDOWS\SYSTEM\MSVBVM60.dll
0x78000000 0x46000 Microsoft (R) C Runtime Library 6.01.8924.0000 04/05/01 19:05 C:\WINDOWS\SYSTEM\MSVCRT.DLL
0x7FF20000 0xC1000 Microsoft OLE for Windows and Windows NT 4.71.2900.0000 23/04/99 22:22 C:\WINDOWS\SYSTEM\OLE32.DLL
0x65340000 0x9B000 2.40.4518.0000 02/04/02 09:15 C:\WINDOWS\SYSTEM\OLEAUT32.DLL
0x6B800000 0x25000 Microsoft (r) Script Runtime 5.06.0000.6626 26/06/01 16:39 C:\WINDOWS\SYSTEM\SCRRUN.DLL
0x66800000 0x155000 Windows Shell Common Dll 4.72.3812.0600 06/12/01 23:25 C:\WINDOWS\SYSTEM\SHELL32.DLL
0x63180000 0x65000 Shell Light-weight Utility Library 6.00.2800.1226 13/07/03 16:05 C:\WINDOWS\SYSTEM\SHLWAPI.DLL
0xBFF50000 0x11000 Win32 USER32 core component 4.10.0000.2222 23/04/99 22:22 C:\WINDOWS\SYSTEM\USER32.DLL
0xBFE70000 0x6000 Win32 VERSION core component 4.10.0000.1998 23/04/99 22:22 C:\WINDOWS\SYSTEM\VERSION.DLL


Any help much appreciated!

<center>


http://www.imgmag.org/images/delta9tetra/lurch-avatar.gif



</center>

[XyZspineZyX]

Mr.Kilroy wrote:
- I appreciate all the help. I may reinstall one of
- these days. Just wish it wasn't such a pain.
-
-
- Thanks, again.
-
No problem. If you instert the WinXP CD and select Install, then choose update, it process is rather painless. An update you also keep all your current settings and programs.

Good Luck,
Shift_E

[XyZspineZyX]

delta_9_tetra wrote:
- Hello, I am win98se user. I would appreciate some
- help to run this program.
-
- If I run QuickMission.exe version 1.00.0000.0028 I
- don't get a window.
-
- The process starts then immediately begins filling
- an error log at C:\Program Files\Quick Mission
- Tuner\ErrorLog.txt like this:
-
-
-
- LoadSkinNames Path not found
- 05/09/03 14:33:49
-

If you are comfortable editing your registry, go to this key:
HKEY_CURRENT_USER\Software\DiverseWare

And delete this key: QMT Edit

Good Luck,
Shift_E

[XyZspineZyX]

Shift_E wrote:

--
-
- If you are comfortable editing your registry, go to
- this key:
- HKEY_CURRENT_USER\Software\DiverseWare
-
- And delete this key: QMT Edit
-
- Good Luck,
- Shift_E
-
-

Thanks very much for the support. Regedit is great. Here's a funny thing: there is no mention of QMT or DiverseWare anywhere in my registry! I'm wondering if I'm missing a file or something. In the folder there are just three files:

missiontuner.exe 2317 KB 28/08/03 12:02:30
payload.mis 132 KB 28/08/03 09:14:04
quick mission tuner.rtf 4182 KB 28/08/03 12:19:12

in addition to the errorlog.txt

This couldn't be something to do with having IL2FB installed on another partition could it, QMT is on C: and FB on E:?

<center>


http://www.imgmag.org/images/delta9tetra/lurch-avatar.gif



</center>

<center>


http://www.imgmag.org/images/delta9tetra/lurch-avatar.gif



</center>

[XyZspineZyX]

Shift_E I like the tool v.much. Thanks.

But I have encountered a possible bug.
Also have a few suggestions for improvements.... Would you like me to post here or PM or what?

S! Simon.
<center>


<font color="#000000">It's my attitude not my aptitude that determines my altitude.</font>
http://extremeone.4t.com/images/sig.jpg

[XyZspineZyX]

delta_9_tetra wrote:
- Shift_E wrote:
-
- Thanks very much for the support. Regedit is great.
- Here's a funny thing: there is no mention of QMT or
- DiverseWare anywhere in my registry! I'm wondering
- if I'm missing a file or something. In the folder
- there are just three files:
-
- missiontuner.exe
- 2317 KB 28/08/03 12:02:30
-
- payload.mis
- 132 KB 28/08/03 09:14:04
-
- quick mission tuner.rtf
- 4182 KB 28/08/03 12:19:12
-
-
- in addition to the errorlog.txt
-
- This couldn't be something to do with having IL2FB
- installed on another partition could it, QMT is on
- C: and FB on E:?
-

First it shouldn't matter where IL2 is installed. For the program to work it has to be able to read and write to the registry. If it can not it will do what it is doing for you right how. If you can't find those registry keys then that's the problem. However I don't know why the tool can not read or write to the registry.

I'm sorry I'm not more help,
Shift_E

[XyZspineZyX]

Extreme_One wrote:
- Shift_E I like the tool v.much. Thanks.
-
- But I have encountered a possible bug.
- Also have a few suggestions for improvements....
- Would you like me to post here or PM or what?

I'm glad you like the tool. The bad news is I had a hard drive failure last week and lost the source code to the program. So the bugs will have to remain I'm afraid. I'm thinking about re-writing it, but that may be awhile out yet. I'd love to hear any suggestions or bugs you have so you can PM or post them here.

Thanks,
Shift_E

[XyZspineZyX]

I finally re-installed Windows like you said. And guess what, your program worked!

Thanks again for the help and the program.

[XyZspineZyX]

thx,shift_e great little program.

After it was refeuled i climbed in.With many manipulations the mechcanics started the turbines.I followed their actions with the greatest of interest.The first one started quite easily.the second caught fire.In no time the whole engine was on fire.Luckily as a fighter pilot i was used to getting quickly out of the cockpit.The fire was quickly put out.The second plane caused no trouble - Adolf Galland (first time in a ME262)

[XyZspineZyX]

Just had to re-install everything after a hard drive replacement and had to search for this excellent utility.
So here's a well-deserved BUMP!

Cheers!


<CENTER>


<IMG SRC="http://www.apqa16.dsl.pipex.com/airplane1.3.jpg"


Ladies & gentlemen, this is the captain speaking. Thankyou for choosing to fly Mandarin Airlines. Those passengers sitting on the left-hand side of the aeroplane please make yourselves comfortable. Those sitting on the right... please look to your left!

[XyZspineZyX]

Hi Shift_e

I wrote above that I had not got your software to run. Happy to say I am now using Quick Mission Tuner with no problems.

Recently while looking for something else I found a CAB file in c:/windows called qmtuner.cab containing files for qmt that had never been unpacked - so I deleted all traces of the old installation and succesfully re-installed.

Its a very useful tool thanks!






http://www.imgmag.org/images/delta9tetra/lurch-avatar.gif

[XyZspineZyX]

delta_9_tetra wrote:
- Hi Shift_e
-
- I wrote above that I had not got your software to
- run. Happy to say I am now using Quick Mission Tuner
- with no problems.
-
- Recently while looking for something else I found a
- CAB file in c:/windows called qmtuner.cab containing
- files for qmt that had never been unpacked - so I
- deleted all traces of the old installation and
- succesfully re-installed.
-
- Its a very useful tool thanks!
-

Great job Delta! I glad you got QMT running and you find it useful.

Way to go,
Shift_E

[XyZspineZyX]

Works fine on win xp pro.
Very usefull - thanks

[XyZspineZyX]

Where and what folders?
there is no readme file http://ubbxforums.ubi.com/infopop/emoticons/icon_frown.gif it's great idea but it's a pain

[XyZspineZyX]

GOZR_il2 wrote:
- Where and what folders?
- there is no readme file /i/smilies/16x16_smiley-sad.gif it's great idea but
- it's a pain
-

Send me an email at qmtsupport(at)verizion.net and I can help you get started. The install I made for QMT wasn't what I thought it was. /i/smilies/16x16_smiley-sad.gif

Shift_E