PDA

View Full Version : Voltaic steam valves, same problem, new day



elmerowl
02-02-2004, 05:01 PM
I understant start at the top, then move down. Other than the large single valve at the bottom around the corner, am I supposed to adjust any of the three that work on the very bottom? Or should all be done by the time I get to the bottom. I am just about ready to tear my hair out.
I have gotten to the bottom relieved pressure on one valve to get to the dotted red line, nothing! Help http://ubbxforums.ubi.com/infopop/emoticons/icon_confused.gif

elmerowl
02-02-2004, 05:01 PM
I understant start at the top, then move down. Other than the large single valve at the bottom around the corner, am I supposed to adjust any of the three that work on the very bottom? Or should all be done by the time I get to the bottom. I am just about ready to tear my hair out.
I have gotten to the bottom relieved pressure on one valve to get to the dotted red line, nothing! Help http://ubbxforums.ubi.com/infopop/emoticons/icon_confused.gif

PrincessXenobia
02-02-2004, 05:17 PM
Shut all of the valves (so that no steam is coming out), take the elevator up to the 3rd level. Open each valve, one by one, and note the effect it has on the gauge. Do the same thing on the middle and bottom levels. Then count the lines btween the needle and the red line. Figure out how many valves from each level you need to open in order to get the needle to move to the red line. Then close all the valves, go back to the top level and make it so!

Good luck http://ubbxforums.ubi.com/images/smiley/16x16_smiley-happy.gif

_____________________
You are standing at the end of a road before a small brick building...