View Full Version : help, i can't start te program
XyZspineZyX
07-17-2003, 09:57 AM
i've got a problem.
i've got rainbow six 3: raven shield for my birthday but i installed i, but it won't start,the following message shows up: your video card is not supported, and you need a video card from 32 mb RAM and i've got sutch won, i've got a nvidea nview from 32mb RAM, why isn't it working?
i hope dat sombody can help me...
jan-jasper from belgium.
XyZspineZyX
07-17-2003, 09:57 AM
i've got a problem.
i've got rainbow six 3: raven shield for my birthday but i installed i, but it won't start,the following message shows up: your video card is not supported, and you need a video card from 32 mb RAM and i've got sutch won, i've got a nvidea nview from 32mb RAM, why isn't it working?
i hope dat sombody can help me...
jan-jasper from belgium.
XyZspineZyX
07-17-2003, 07:06 PM
Can you post your dxdiag report for us? To do this, follow these directions:
1. Click start, then run, then type in "dxdiag" (without the quotes) and press enter.
2. Once the tool loads, click the "save all information" button at the bottom of the window.
3. Save that file somewhere on your hard drive that you can find, then you can open the file in notepad and cut and paste that information into a reply to this post.
Ghost Recon FAQ (http://forums.ubi.com/messages/message_view-topic.asp?name=us_ghostrecon_ts&id=zyxhq) | Splinter Cell FAQ (http://forums.ubi.com/messages/message_view-topic.asp?name=scell_tech&id=zzumi) | Raven Shield FAQ (http://forums.ubi.com/messages/message_view-topic.asp?name=us_ravenshield_ts&id=zzfuu)